400ml Spray Can All Round Brunox Multi Function Spray Lube.
This amazing multi function lube spray will clean, lube & protect your motorcycle
- Creep Oil / Rust Loosener
- Cleaning agent
- Contact spray
5 function - spray with Turboline
BRUNOX Turbo-Spray, the only multi-function-spray with the additive Turboline which guarantees a high capillary effect and the best coverage (100 – 120 m2/l).
BRUNOX Turbo-Spray is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX Turbo-Spray an invisible, compact, non-hardening anti-corrosive film is formed, providing reliable protection.
BRUNOX Turbo-Spray can be removed without difficulty with cleaning materials for painting etc.
Application & Effect
BRUNOX Turbo-Spray is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive Turboline.
BRUNOX Turbo-Spray is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair line cracks and spaces and for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
BRUNOX Turbo-Spray guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this, guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
BRUNOX Turbo-Spray penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminium, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
BRUNOX Turbo-Spray has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
BRUNOX Turbo-Spray contains ● no silicone ● no PTFE ● no graphite
BRUNOX Turbo-Spray behaves neutral against ● varnish, leather, wood, rubber, plastic and fabric
BRUNOX Turbo-Spray contains ● just 3% propellant (CO2), i.e. 97% active substance
BRUNOX Turbo-Spray has ● a flash point of 78 degrees C