Chrome Exhaust Yamaha YBR125 Custom 2008 2009
N.B The YBR125 Custom has a longer mounting bracket than the standard YBR, so the mounting hole is about 1.5” further back. A customer advised us that you cut down the end of the mounting plate, rounding it off to look ok and then re-paint. Drill a new hole in correct position and fit the exhaust. There is enough flex in the exhaust bracket to bring it further in to line.
This is not as original for the later injection YBR's but is fine for the earlier models.
On injection models there is no inlet for the breather pipe from the crankcase.
It is fine to use the exhaust without the breather or just use a bung to blank it off.
Your bike will run without any issues if you do this