DID

DID 530ZVM-116 Gold X-Ring Heavy Duty Drive Chain

£143.65Includes 20% VAT
Out of Stock
We cannot say when this item will be back in stock due to global events beyond our control.
This product fits the Suzuki GSF1200 SA Bandit (Half Faired) (ABS) 2006 model.
Manufacturer: DID
Pack size: Each
SKU: 002539

Share:  

DID 530ZVM-116 Gold X-Ring Heavy Duty Drive Chain

Comes with rivet link, no split link but these can be found under split links via search.

This final drive chain is the correct length and pitch for standard factory fitted sprockets.

This may not be the most suitable grade of final drive (roller) chain for your machine, we suggest selecting the correct grade recommended in your workshop manual.
Some classic Brit's and classic Jap bikes may need a spacer behind the front sprocket if using an O-ring or X-ring chain because these chains are slightly wider and may rub against your casing.
There is plenty of advice on the internet about this modification in forums and elsewhere.

  • If you have odd sprockets with fewer or more teeth than standard you will have to select equivalent pitch and suitable length from our drive chain category. Always select a longer chain if in doubt, you can then cut it down with one of our chain tools, its not so simple to add links if its too short!
  • Always go up or down in even numbers of teeth as odd numbers will make selecting the length of chain to suit, much more difficult for beginers

Chain Type Guide:

  • Standard chain is a regular chain used on smaller bikes
  • Heavy Duty is mostly aimed for midsized road bikes, most MX bikes can run on HD chain
  • O-ring is a sealed chain mainly used on large road bikes. It's also used on some MX bikes, especially for Enduro use as they retain lubrication better than HD chains
  • X-ring is a step up from O-ring, they hold lubrication even longer therefore providing less friction and will last longer when compared to a matching brand. An X-ring seal has two lips to seal, to keep lube in and dirt out as it sits flat, it seals better than the O-ring seal
  • The life of O-ring chain is usually determined by the durability of the O-ring. To improve the durability, there should be an oil film on the O-rings at all times. Even though it is a sealed chain, lubrication is required to extend its working life
  • However, make no mistake, a more expensive O-ring chain can easily out last a cheaper X-ring chain
  • We now stock the latest grades of chain including the Z-ring from WRP, UWV narrow UW-ring (Perfect for large classics), XW-ring heavy duty and super heavy duty, XSO RX-ring heavy duty all from RK Takasago Chain
Before You Place Your Order...
  1. Note the image may not be exactly as item received and any slight difference will not be inferior or effect performance
  2. Check the fitment list to ensure this item will fit your vehicle
  3. When we refer to right or left, this is as you sit on your vehicle
  4. To find part by SKU, enter the number without "SKU" into the search box
  5. Products containing any fluid or hazardous materials, aerosols, batteries including large lithium jump starters cannot be shipped overseas due to courier restrictions although we can ship UK offshore and Scottish Highlands at higher shipping rates
  6. EU customers should check with your countries customs office to determine what additional costs such as tax or Import duties will be prior to purchasing. These charges are normally collected by the delivery company or when you pick the item up, they are not included in the item price or shipping charge on this website

All parts and accessories are brand new and include VAT where applicable.
Most parts are pattern or aftermarket although some will be genuine but are not always stated as being so.
The use of motorcycle manufacturers' names is for reference purposes only. We do not imply that the products we sell are made by or with the permission of the names listed.

CB1000 F SC30 (Big One) 1993-97
CB1000 R 2008-13
CB1000 RA (ABS) 2008-13
CBR1000 RA Fireblade (C-ABS) 2009-13
CBR1000 RR Fireblade 2008-13
CBR750 F Superaero 1987-88
VFR800 X Cross Runner 2013
ZR1100 A Zephyr 1991-95
ZR1100 B Zephyr 1996-97
ZX-12R Ninja (ZX1200A) 2000-01
ZX-12R Ninja (ZX1200B) 2002-06
ZZR1400 (ABS) (ZX1400B) 2006-07
ZZR1400 (ABS) (ZX1400D) 2008-10
ZZR1400 (ZX1400A) 2006-07
ZZR1400 (ZX1400C) 2008-11
GSF1200 A Bandit (Naked) (ABS) 2006
GSF1200 Bandit (Naked) 2006
GSF1200 S Bandit (Half Faired) 2006
GSF1200 SA Bandit (Half Faired) (ABS) 2006
GSF650 A Bandit (Naked) (ABS) 2006
GSF650 SA Bandit (Faired) (ABS) 2005-06
GSX1400 2001-08
GSX750 F (Fully Faired) 1999-06
GSXR1100 WS 1995
GSXR1100 WT 1996
GSXR1100 WV 1997
GSXR1100 WW 1998
VZ800 Marauder 1997-04
Sprint GT (1050cc) (EFI) (ABS) 2011-13
Sprint GT (1050cc) SE (EFI) (ABS) 2013
FZS1000 Fazer 2001-05
FZS1000 S Fazer 2003-05
YZF-R1 2004-05
530 Conversion

YZF-R6 1998-05

You May Also Like

WRP 19-5034 Universal CV Boot Kit (Small)
Pack size: Each SKU: 031880

£17.20

View Details
65mm x 70mm Rear Sprocket Insert Bush
Pack size: Each SKU: 002859

£6.80

View Details
8mm x 28mm Rear Sprocket Bolts
Pack size: Pack of 6 SKU: 002866

£9.65

View Details
40mm x 25.5mm x 1.5mm Front Sprocket Spacer
Pack size: Each SKU: 002991

£1.80

View Details
10mm x 14mm Rear Sprocket Locking Flange Nuts
Pack size: Pack of 20 SKU: 002897

£14.75

View Details
WRP 25-2069-5 Differential Seal Kit
Pack size: Each SKU: 029407

£20.40

View Details