Brand cross reference: Vesrah VD254, VD925; EBC 115; Ferodo FRP405; SBS 559. You may need more than a single pair of pads if you have twin d...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 43.00mm. Gudgeon pi...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 42.00mm. Gudgeon pi...
Outer diameter 15mm. Inner diameter 12mm. Length 14mm.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Outer diameter 41.00mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 41.50mm. Gudgeon pi...
Outer diameter 40.50mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. The RXP ch...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...
Outer diameter 39.00mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
Outer diameter 40.00mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 47.00mm. Gudgeon pi...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 40.00mm. Gudgeon pi...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 6. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...
Steel sprocket. Replaces JT Sprockets JTF240-11.
Suitable for S5E S5T and S5N Franco Morini engines with two bolt holes in the intake manifold gaskets. This engine gasket set contains most ...