Steel sprocket. ID: 134mm. PCD (Pitch Circle Diameter): 150mm. Bolt hole OD: 8.50mm. Number of bolt holes: 6. Pitch: 520. Replaces JT Sprock...
Inner diameter 111mm. Outer diameter (without pegs) 132mm. Outer diameter (including pegs) 142mm. Thickness 2.8mm. Number of pegs 12. Peg wi...
Outer diameter 133mm. Thickness 1.6mm. Number of pegs 34.
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF569.12. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF569.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Rear. Tooth Count: 46. JT Part Number: JTR460.46. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 47. JT Part Number: JTR460.47. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 45. JT Part Number: JTR460.45. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 7. Reach 19mm (3/4"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm g...
Note: The wire ends may need modification and the hole centres are 90mm but we are aware that some models are 84mm so will also need modific...
Brand: JT Sprockets. Position: Rear. Tooth Count: 43. JT Part Number: JTR460.43. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 42. JT Part Number: JTR460.42. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Outer diameter 19.60mm. Length 35.00mm. Thickness 2.50mm. Heavy duty clutch springs.
Koyo 32005X. Inner diameter 25mm. Outer diameter 47mm. Width 15mm. Made in Japan. Bearing seal SKU: 013248. Replacement aftermarket part for...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 520VX...
Height 38mm. Width 50mm. Replacement for Hiflofiltro HF112, HF113; Champion X301. This filter does not come with an O-ring. Replacement afte...
This kit includes the following bearings: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 25mm x OD 47mm x Thickness 15mm.
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 25mm x OD 47mm x Thick...
Steel sprocket. Replaces JT Sprockets JTF569-10.
This wheel bearing kit uses premium quality Japanese Koyo bearings.
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF569.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
