On and off positions. 34mm between bolt hole centres. 3mm straight outlet. Takes pipe with a 3mm inner diameter. Made in Japan. Replacement ...
On, off and reserve positions. 35mm between bolt hole centres. Straight outlet.
On, off and reserve positions. 34mm between bolt hole centres. 5mm side outlet. Takes pipe with a 5mm inner diameter.
On, off and reserve positions. Thread 16mm. Pitch 1.50mm. 6mm right hand outlet. Takes pipe with a 6mm inner diameter. Replacement aftermark...
Prime, on and reserve positions. 44mm between bolt hole centres. 6mm side outlet. Takes pipe with a 6mm inner diameter. Made in Japan. Repla...
On and off positions. 34mm between bolt hole centres. 6mm rear outlet. Takes pipe with a 6mm inner diameter. Made in Japan. Replacement afte...
On and off positions. 34mm between bolt hole centres. 6mm rear outlet. Takes pipe with a 6mm inner diameter. Made in Japan.
Prime and on positions. 50mm between bolt hole centres. Two 6mm side outlets. Takes fuel pipe with a 6mm inner diameter. No reserve. No leve...
Prime and on positions. 34mm between bolt hole centres. 3.5mm rear outlet. Takes pipe with a 3.5mm inner diameter.
On and off positions. Thread 12mm. Pitch 1.00mm. Front outlet. This will suit the following models as well as those listed in fitments: Hond...
On, off and reserve positions. Thread 12mm. Pitch 1.25mm. Side outlet. How to measure your fuel tank thread: . Measure from the outside tip ...
Prime, on and reserve positions. 44mm between bolt hole centres. 6mm side outlet. Takes pipe with a 6mm inner diameter. Made in Japan.
Prime, on and reserve positions. Twin diaphragm. 44mm between bolt hole centres. 2 x 6mm side outlets. Takes pipe with a 6mm inner diameter....
Prime, on and reserve positions. 4 x 8mm side outlets. Takes pipe with an 8mm inner diameter.
On, off and reserve positions. 34mm between bolt hole centres. 5mm right hand outlet. 5mm rear outlet. Takes pipe with a 5mm inner diameter.
Made in Japan to OEM specification. Replacement aftermarket part for Yamaha OEM 4WM-24500-10-00, 4WM24500-00-00, 4WM24500-01-00, 4WM24500-02...
Prime, on and reserve positions. 34mm between bolt hole centres. 6mm side outlet. Takes pipe with a 6mm inner diameter.
On and off positions. 34mm between bolt hole centres. Includes O-ring seal to tank. 6mm straight outlet. Takes pipe with a 6mm inner diamete...
On, off and reserve positions. Thread 18mm. Pitch 1.00mm. Right hand outlet. How to measure your fuel tank thread: . Measure from the outsid...
Prime, on and reserve positions. 44mm between bolt hole centres. 6mm rear outlet. Takes pipe with a 6mm inner diameter. Made in Japan.
Suitable for Harley Davidson models and others. Thread: 3/8" NPT (National Pipe Thread). On, off and reserve positions. 90 degree right...
Prime and on positions. 34mm between bolt hole centres. 4.5mm rear outlet. Takes pipe with a 4.5mm inner diameter. Made in Japan.
On, off and reserve positions. 34mm between bolt hole centres. 8mm side outlet. Takes pipe with 8mm inner diameter.
On, off and reserve positions. 34mm between bolt hole centres. 62mm from end of float bowl to flange face. 29mm from centre of tap to flange...
Prime, on and reserve positions. 34mm between bolt hole centres. 6mm side outlet. Takes pipe with a 6mm inner diameter. Made in Japan.
This tap is often used on custom style twin fuel tanks so that when one tank empties it draws fuel from the other. It does not have reserve ...
On, off and reserve positions. Thread 16mm. Pitch 1.25mm. Right hand outlet. How to measure your fuel tank thread: . Measure from the outsid...
On and off positions. 34mm between bolt hole centres. 2 x 6mm rear outlets. Takes pipe with a 6mm inner diameter. Made in Japan.
On, off and reserve positions. Thread 14mm. Pitch 1.00mm. Right hand outlet. How to measure your fuel tank thread: . Measure from the outsid...