Please Note: These are not suitable for flat sided Keihin carbs. Made in Japan to OEM specification. Replacement aftermarket part for Suzuki...
Also known as carburettor intake manifold rubbers. Made in Japan to OEM specification.
Downpipe to silencer gasket. Outer diameter 48.8mm. Inner diameter 40.5mm. Thickness 10mm. Replacement aftermarket part for Yamaha OEM 3FL-1...
Outer diameter 44.5mm. Inner diameter 38.5mm. Width 25mm.
On and off positions. 34mm between bolt hole centres. 3mm straight outlet. Takes pipe with a 3mm inner diameter. Made in Japan. Replacement ...
Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
Choke cable operated carb. Manifold inlet hole centres 48mm. Main jet size: 85. Pilot jet size: 40. Slide 15mm. Air filter mount: 33mm. Repl...
Inner diameter: 5mm. Outer diameter: 8mm. Length: 5 metres.
Note: Any jets in this kit may not be the same size as factory fitted. Made in Japan. Replacement aftermarket part for the following OEM num...
Double filter screen. If you have an old bike and can't find an air filter for it, you can often make a copy of the original with our air fi...
Replacement aftermarket part for the following OEM numbers: Honda 17211-GB4-770.
Type: K1. 4.40mm x 13.60mm. Can use with or without clip. Made in Japan to OEM specification. Replacement aftermarket part for the following...
Outer diameter 40mm. Inner diameter 32mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Please note: this item may need some slight modification to line it up on some models. Replacement aftermarket part for Honda OEM 18310-413-...
42mm is the outside diameter of your carburettor intake. Overall length including rubber collar: 85mm. Outside diameter of rubber collar: 55...
End 1 inner diameter 23mm. End 2 inner diameter 26mm. Length 54mm.
45mm between bolt hole centres.
Non-asbestos. Outer diameter 40mm. Inner diameter 31mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Replacement aftermarket part for Honda OEM 18601-MBW-003.
Fits all our 1/2" fuel taps. Takes pipe with a 6mm inner diameter.
Head size 6mm. Thread 5mm. Pitch 0.80mm. Overall length 9mm. Thread length 5mm. These are not genuine Keihin.
Half-moon shaped. Fitted to many Honda models. Diameter 35mm. Length 18mm.
Set is enough for 1 carburettor.
Fits 8mm (5/16") inner diameter fuel line. Filter Inlet OD: 8.5mm. Filter Outlet OD: 8.5mm. Filter Inlet ID: 6mm. Filter Outlet ID: 6mm...