Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Non-asbestos. Outer diameter 46mm. Inner diameter 38mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
Outer diameter 10.5mm. Inner diameter 7.3mm. Stem 4.5mm.
Outer diameter 46mm. Inner diameter 37mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Suzuki OEM 59313-36500.
Outer diameter 34mm. Inner diameter 6mm. Width 5.5mm.
Smallest of the two mechanical water pump seals fitted in mainly Suzuki models. Outer diameter 24mm/29mm. Inner diameter 11.15mm/22.5mm. Wid...
Made in Japan. Replaces Suzuki 59667-49460, 69667-49300.
Cylinder head to rocker box mounting rubber. Outer diameter 25.5mm. Inner diameter 11mm. Thickness 2mm. Replacement aftermarket part for Suz...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Brand cross reference: Vesrah VD435; EBC 231, EBC 259; Ferodo FDB2049; SBS 704. You may need more than a single pair of pads if you have twi...
Kit contains a pair of fork oil seals.
Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one. Works ...
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. This kit contains an inner oil seal...
Piston outer diameter 30mm. Piston length 29mm. This kit includes a single piston with matching internal oil seal and outer dust seal. Suita...
Made in Japan. Replaces Suzuki 59667-04700.
Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one.
Kit contains a pair of fork dust seals.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Suzuki OEM 69186-04F00. Repl...
Width at base 9mm. Length 25.5mm.
Base width: 9.3mm. Glass width: 9.6mm. Glass length: 24.8mm.
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
Please Note: Owners of Kawasaki ZZR models and possibly other models that we have been informed of the included circlip could be too slack a...
Piston outer diameter 38mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. Rep...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...