12 x 50g Tubes of Red Hylotyte. The old Hermetite products have been discontinued and replaced by Hylotyte Hylotyte Red from the makers of Hylomar Universal Blue
N.B This is NOT Hermetite
Hylotyte Red is a polyester urethane based sealant that is semi hardening even at high temperatures. The excellent gap-filling properties, make it ideal for pitted or roughly machined surfaces. The compound is resistant to a wide range of fluids including all indusTrail fuels, oils, water and brine, air, turbine and piston engine combustion products, water, water/glycol and methanol mixtures, petroleum and synthetic diester lubricating oils, gasoline and kerosene fluids (Avtur & Avcat) and fluorocarbon refrigerants. Hylotyte Red can be used to seal joint faces or threaded parts.
Instructions for use
Hylotyte Red should be applied to clean dry surfaces. Spread evenly over both mating surfaces. Once applied, sufficient time should be allowed for the product to become tacky before the joint is assembled. Due to the nature of the compound, fasteners may be required to be re-tightened to the correct torque.
Hylotyte Red can be removed from dismantling components by rubbing with a cloth soaked with Acetone or Hylomar Rally and Grand Prix Wipes. No scraping is necessary.
Hylotyte Red enables the effective sealing of metal to metal and plastic to plastic components. Typical applications include water and oil pumps, instrument inspection covers, cylinder heads and sumps, weather -proofing, motors and outdoor high voltage circuit breakers. Inlet manifolds, timing case covers, oil pump joints, gear box and transmission components or thread sealing. There is no
staining of copper and silver, etc., from traces of volatiles at elevated
temperature, and is therefore suitable for joints, and threads in close
proximity to switch mechanisms, etc.
Handling and Safety Properties
The compound is non-flammable
Product contains Dichloromethane
Labelling = Harmful. Carc cat 3. Phrases R40, S2, S23, S24/25 & S36/37