TourMax Regulator Rectifier Suzuki 32800-24B11 32800-33C01

TourMax Regulator Rectifier Suzuki 32800-24B11 32800-33C01

• 67mm between bolt hole centres
• 5 wires
• Each cable are approx 150mm
• Made in Japan

Replacement aftermarket part for Suzuki OEM 32800-24B01, 32800-24B00, 32800-24B11, 32800-24B10, 32800-30B00, 32800-33C01, 32800-33C00 32800-30B01, 32800-33B01

If the connection block doesn't match yours exactly they can be unclipped by inserting small flat head screw driver or other suitable object and unclipping, similar to an Ethernet or telephone plug. Re-connect using same method. The 3 yellows can be replaced in any order.

Regulator/Rectifier Fitting Instructions

When on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is running this would increase to between 14 and 15 Volts.
Yamaha and certain Honda motorcycle's use a three-phase type system, with a permanent magnet instead of an electromagnet, to regulate the current from the alternator.
Rather than controlling the output from the alternator, the excess voltage would be dumped by means of heat transfer.
To improve the transfer of heat from the regulator/rectifier you can use a silicone heat sink compound which is placed on the back of the regulator/rectifier and on the mounting point. Both surfaces must be clean for better contact and heat transference.
Also, to improve the earth of the regulator/rectifier, a cable can be introduced on one of the mounting bolts and connected directly to the negative terminal of the battery (earth side). This would eliminate the unreliable arrangement of earth fittings that are connected to various parts of the frame or motorcycle that does not always work. This type of earth is used as standard on some Yamaha and Honda motorcycles.