Due to new lock down, we are extremely busy and will take extra time to answer you, please be patient
TVH

TVH 428-126 Black Heavy Duty Drive Chain

£9.17Includes 20% VAT
Out of Stock
Manufacturer: TVH
Pack size: Each
SKU: 002320

Share:  

TVH 428-126 Black Heavy Duty Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets.

  • Comes with a split link only

This may not be the most suitable grade of final drive (roller) chain for your motorcycle so, select only the correct grade recommended in your workshop manual.

Most all classic British, small Japanese, mopeds, MX and large classic Japanese bikes take a non-O-ring chain, the large modern machines will require an O or X-Ring

  • If you have odd sprockets with fewer or more teeth than standard you will have to select equivalent pitch and suitable length from our drive chain category. Always select a longer chain if in doubt, you can then cut it down with one of our chain tools, its not so simple to add links if its too short!
  • Typically adding two teeth to the rear sprocket equals the same as dropping one tooth on the front which means you can still use the standard length of chain whichever way you choose. We would however, advise on not using a smaller than standard front sprocket. On a smaller sprocket, the drive chain must turn a tighter radius, which increases friction and decreases the life expectancy of the chain
  • Our drive sprockets are listed for example (Front 14T) or (Rear 48T). These are non-standard sprockets and the 14T or 48T stands for the number of teeth. If a sprocket is simply marked (Front Standard) or (Rear Standard), this means that these are the factory fitted sprockets with the original number of teeth
  • Always go up or down in even numbers of teeth, as odd numbers will make selecting the length of chain to suit, more difficult

Chain Type Guide

  • Standard chain is a regular chain used on smaller bikes
  • Heavy Duty is mostly aimed for midsized road bikes, most MX bikes can run on HD chain
  • O-ring is a sealed chain mainly used on large road bikes. It's also used on some MX bikes, especially for Enduro use as they retain lubrication better than HD chains
  • X-ring is a step up from O-ring, they hold lubrication even longer therefore providing less friction and will last longer when compared to a matching brand. An X-ring seal has two lips to seal, to keep lube in and dirt out as it sits flat, it seals better than the O-ring seal
  • The life of O-ring chain is usually determined by the durability of the O-ring. To improve the durability, there should be an oil film on the O-rings at all times. Even though it is a sealed chain, lubrication is required to extend its working life
  • However, make no mistake, a more expensive O-ring chain can easily out last a cheaper X-ring chain
Before You Place Your Order...
  1. Note the image may not be exactly as item received and any slight difference will not be inferior or effect performance
  2. Check the fitment list to ensure this item will fit your vehicle
  3. When we refer to right or left, this is as you sit on your vehicle
  4. To find part by SKU, enter the number without "SKU" into the search box
  5. Products containing any fluid or hazardous materials, aerosols, batteries including large lithium jump starters cannot be shipped overseas due to courier restrictions although we can ship UK offshore and Scottish Highlands at higher shipping rates
  6. EU customers should check with your countries customs office to determine what additional costs such as tax or Import duties will be prior to purchasing. These charges are normally collected by the delivery company or when you pick the item up, they are not included in the item price or shipping charge on this website

All parts and accessories are brand new and include VAT where applicable.
Most parts are pattern or aftermarket although some will be genuine but are not always stated as being so.
The use of motorcycle manufacturers' names is for reference purposes only. We do not imply that the products we sell are made by or with the permission of the names listed.

Cocis 75 1991
VS125 Evolution 2001-04
KK125 1986-89
KZ125 1986-89
RRT Nebraska 1987
RV125 1986-88
Cruise II 125 1999-06
GF125 1999-05
KLX140 L B 2008-14
KLX140 L B Monster Energy 2009
KMX200 A 1988-91
Pulsar 125 (CK125) 1999-06
Pulsar 125 Lux 2003
Pulsar 125 LX 2003
Stryker 125 2001-06
Stryker 125 Trail 2001-06
MH7 125 Naked (A/C) 2008-10
RS2 125 2006-10
RS2 125 Matrix (MRX125) 2006-09
RS2 125 Naked (NKD125) 2006-10
RS2 125 Pro 2007-10
RM125 1975
TS125 X 1984
TS125 XU 1984-90
AG200 1985
DT125 LC2 MK2 (Front Disc) 1985-87
DT125 LC3 MK3 (Front Disc) 1986-89
DT200 R (3ET) 1988
DT80 LC 1986-92
TW125 2003-04
XT125 X 2005-09

You May Also Like

68mm x 37mm Rear Sprocket Rubbers
Pack size: Set of 4 SKU: 002974

£7.40

View Details
15 Tooth Front Sprocket - 003385
Pack size: Each SKU: 003385

£5.30

View Details
63HV304-52A Primary Chain
Pack size: Each SKU: 002795

£79.56

View Details
Chrome Rear Sprocket Cover
Pack size: Each SKU: 002858

£10.48

View Details
16.5mm x 8.1mm x 748mm Drive Belt
Pack size: Each SKU: 002000

£9.74

View Details
Front Sprocket Retainer - 002929
Pack size: Each SKU: 002929

£1.36

View Details
63HV306-46 Secondary Chain
Pack size: Each SKU: 002807

£95.08

View Details
TVH 520-114 Gold X-Ring Drive Chain
Pack size: Each SKU: 002439

£36.23

View Details

Excellent

Trustpilot 5 stars
Rated 4.9 out of 5 based on 3,700 reviews on
Trustpilot brandmark