42mm is the outside diameter of your carburettor intake. Overall length including rubber collar: 85mm. Outside diameter of rubber collar: 55...
Straight TR4 valve.
Outer diameter 14mm. Inner diameter 7mm. Length 38mm. Push-over style. Open both ends. Replacement part for the following OEM numbers: Suzuk...
Koyo 6302DDU. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 15mm. Width 13mm. Made in Japan to OEM specification. Replacem...
Double filter screen. If you have an old bike and can't find an air filter for it, you can often make a copy of the original with our air fi...
End 1 inner diameter 23mm. End 2 inner diameter 26mm. Length 54mm.
Inner diameter 35mm. Outer diameter 48mm. Thickness 11mm. Replacement part for the following OEM numbers: Honda 91255-KBH0-03, 91255-300-023...
Koyo 6202DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 15mm. Width 11mm. Made in Japan to OEM specification. Replacem...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Straight valve.
If you have an old bike and can't find an air filter for it, you can often make a copy of the original with our air filter foam sheets.
Thread 12mm. Pitch 1.50mm. Full length 20mm. Width of head 17mm spanner. Thread length 10mm or 13mm including magnet. Replacement part for t...
Durability, It's about the RubberHeidenau's compound uses a high natural rubber content, and there's a lot on there. This naturally resilien...
2 bolt hole type. 34mm between bolt hole centres.
On, off and reserve positions. 34mm between bolt hole centres. 5mm side outlet. Takes pipe with a 5mm inner diameter.
Outer diameter 34.5mm. Inner diameter 22mm. Thickness 1mm. Material: Alloy.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Inner diameter 35mm. Outer diameter 48mm. Thickness 14.5mm.
Note: Any jets in this kit may not be the same size as factory fitted. Made in Japan.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Koyo 6304. Outer diameter 52mm. Inner diameter 20mm. Width 15mm. Made in Japan to OEM specification.
Rear footrest rubbers (Pillion). Replacement part for the following OEM numbers: Suzuki 43612-03001. Yamaha 120-27433-00.
On some models just the light unit itself will fit without the black plastic rim. Replacement part for Yamaha OEM 35A-84303-30. Total approx...
Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.
Straight TR6 valve.
BAY15D. Total height: 47mm. Total width: 25mm. Base width: 15mm.
Outer diameter 130mm. Width 28mm. How to measure drum brake shoes: Outer Dimension: Preferably use a caliper although a tape measure would g...
