Yamaha DT250 MX 1981 Parts

148mm x 2.9mm Clutch Friction Plate with 12 Pegs

Outer diameter (including teeth) 148mm. Thickness 2.9mm. Number of pegs 12. Replacement for Vesrah VP2041/2.

TVH 520-104 Gold X-Ring Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...

Black Round Yamaha Mirrors with 10mm Thread

Yamaha thread. Left hand mirror has right hand thread. Right hand mirror has left hand thread. Glass outer diameter 110mm. 140mm stem length...

Clamp-On Indicator with Amber Lens - 018986

Robust, lightweight, and weather resistant. Complete with bulbs and wiring.

TourMax Fuel Tap Repair Kit - 023535

Non-diaphragm tap type. Made in Japan.

Black Clutch Lever - 015055

28mm x 17mm x 7mm Clutch Arm Rod Oil Seal

Outer diameter 28mm. Inner diameter 17mm. Width 7mm.

12 Tooth Front Sprocket - 003054

Steel sprocket. Replaces JT Sprockets JTF569-12.

62mm x 30mm x 16mm Crank Bearing - 007583

Koyo 6206. Outer diameter 62mm. Inner diameter 30mm. Width 16mm. Made in Japan.

62mm x 30mm x 16mm Crank Bearing - 007583

Koyo 6206. Outer diameter 62mm. Inner diameter 30mm. Width 16mm. Made in Japan.

15 Tooth Front Sprocket - 003412

Steel sprocket. Replaces JT Sprockets JTF569-15.

14 Tooth Front Sprocket - 003268

Steel sprocket. Replaces JT Sprockets JTF569-14.

16 Tooth Front Sprocket - 003510

Steel sprocket. Replaces JT Sprockets JTF569-16.

13 Tooth Front Sprocket - 003137

Steel sprocket. Replaces JT Sprockets JTF569-13.

17 Tooth Front Sprocket - 003572

Steel sprocket. Replaces JT Sprockets JTF569-17.

134mm x 1.5mm Clutch Metal Plate with 27 Pegs

Outer diameter 134mm. Thickness 1.5mm. Number of pegs 27.

18 Tooth Front Sprocket - 003594

Steel sprocket. Replaces JT Sprockets JTF569-18.

Black Brake Lever - 014753

Clutch Cable - 013975

Outer length: 1100mm. Outer top fitting: standard ferrule. Outer bottom fitting: 7mm stepped ferrule. Additional outer info: top adjuster. I...

55mm x 30mm x 10mm Crank Oil Seal (Castle)

Outer diameter 55mm. Inner diameter 30mm. Width 10mm.

NGK DR8EIX Iridium Spark Plug

Thread 12mm x hex 18mm x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre electrode. 0.7...

48 Tooth Rear Sprocket - 004507

Steel sprocket. Replaces JT Sprockets JTR855-48.

43 Tooth Rear Sprocket - 004169

Steel sprocket. Replaces JT Sprockets JTR855-43.

44 Tooth Rear Sprocket - 004234

Steel sprocket. Replaces JT Sprockets JTR855-44.

45 Tooth Rear Sprocket - 004308

Steel sprocket. Replaces JT Sprockets JTR855-45.

47 Tooth Rear Sprocket - 004449

Steel sprocket. Replaces JT Sprockets JTR855-47.

46 Tooth Rear Sprocket - 004385

Steel sprocket. Replaces JT Sprockets JTR855-46.

6v/12v Ignition Coil Single Output + 1 Terminal AS41-CDI (60mm)

If your coil has 2 spades the second is for earth so before you fit the new one clean where it bolts to by scraping any paint or rust off th...

6v 2-Pin 10 Watt Indicator Relay

For use with bulbs up to 10 watt.

JT Sprockets 12 Tooth Front Sprocket JTF569.12

Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF569.12. Type: Standard. Material: Steel. Fitment: Direct replaceme...