Outer diameter 40mm. Inner diameter 17mm. Width 7mm.
Yamaha thread. Left hand mirror has right hand thread. Right hand mirror has left hand thread. Glass outer diameter 100mm. 120mm stem length...
Replacement aftermarket part for Yamaha OEM 137-83912-02-38, 137-82912-02-00, 137-83912-00-00, 137839-12-01-00, 137839-12-01-38, 137839-12-0...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Replacement aftermarket part for Yamaha OEM 2N3-83922-00, 137-83922-00, 137-83922-01-00, 137-83922-02-00, 137-83922-02-38, 232-83922-30-00, ...
Outer diameter (including teeth) 123mm. Thickness 3.5mm. Number of pegs 8. Replacement aftermarket part for the following OEM numbers: Yamah...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 12.7mm (1/2") reach. Standard 2.5mm copper core cent...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Brand: JT Sprockets. Position: Rear. Tooth Count: 54. JT Part Number: JTR833.54. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR833.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF542.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
Non-diaphragm tap type. Made in Japan.
35mm is the outside diameter of your carburettor intake. Filter is 43mm long.
Inner diameter 30mm. Outer diameter 48mm. Width 14mm.
Replacement for FEW M48, M76, D92; Daiichi DM78, M76, DM79K, DH31, DN52, DM69; Honda OE 30202-041-015; Yamaha OE 1K8-81321-20, 120-81321-20,...
Note: The Fizzy FS1/FS1E used different condensers throughout models, so please check the image as you may need our SKU: 005012 with a singl...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Top 1 outer length: 725mm. Bottom 1 outer length: 405mm. Bottom 2 outer length: 260mm. Outer top 1 fitting: 45' bend, 10mm adjuster. Outer b...
