Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
175mm approx length.
27mm tapering down to 14mm. Length 32cm. Suitable replacement part for Yamaha Fizzy OEM numbers: 348-14753-00, 296-14753-02.
Koyo 6204. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan to OEM specification.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
On some models that use two oil seals on the gear shift arm, this is the first seal that goes with an inner diameter of 12mm. Outer diameter...
Replacement front fork gaiters suitable for the Yamaha FS1-E and many other models with similar fork dimensions. Rubber compound for water r...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Outer diameter 14mm. Inner diameter 7mm. Length 38mm. Push-over style. Open both ends. Replacement part for the following OEM numbers: Suzuk...
Bulbs type MPF. 15.5mm inner diameter. Three wires. Green = earth. White = low beam. Blue = high beam. This bulb holder takes the following ...
Replacement for FEW M48, M76, D92; Daiichi DM78, M76, DM79K, DH31, DN52, DM69; Honda OE 30202-041-015; Yamaha OE 1K8-81321-20, 120-81321-20,...
Thread 12mm. Pitch 1.50mm. Full length 20mm. Width of head 17mm spanner. Thread length 10mm or 13mm including magnet. Replacement part for t...
Single bolt mounting. 2 wires with spade connectors. Replacement part for the following OEM numbers: Honda 31700-045-671, 32800-07071. Suzuk...
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
Koyo 6004DDU. Inner diameter 20mm. Outer diameter 42mm. Width 12mm. Made in Japan to OEM specification.
Length 150mm. Width 28mm. As fitted to Yamaha FS1, FS1E.
Fitted with 12V 25/25W MPF bulb. Bulb holder SKU: 018114. 4.5" is the full width of glass. Max width: 135mm. Max depth: 120mm. No side ...
Outer diameter 4.8mm. Length 117.5mm. Replacement part for Yamaha OEM 257-16357-00.
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
BAY15D. Total height: 47mm. Total width: 25mm. Base width: 15mm.
Koyo 6301DDU. Double sided rubber sealed. Outer diameter 37mm. Inner diameter 12mm. Width 12mm. Made in Japan to OEM specification. Replacem...
Rear footrest rubbers (Pillion). Replacement part for the following OEM numbers: Suzuki 43612-03001. Yamaha 120-27433-00.
Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.
Straight TR4 valve. Same as 90/80-R17. Replacement part for the following OEM numbers: Honda 42712-GS4-006, 42712-041-154, 42712-052-009.
Outer diameter 42mm. Inner diameter 30mm. Width 7mm.