Steel sprocket. Replaces JT Sprockets JTF563-13.
Steel sprocket. Replaces JT Sprockets JTF563-15.
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Steel sprocket. Replaces JT Sprockets JTR832-39.
Steel sprocket. Replaces JT Sprockets JTR832-41.
Steel sprocket. Replaces JT Sprockets JTR832-48.
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF563.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF563.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF563.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR832.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 6. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...
Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR832.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 48. JT Part Number: JTR832.48. Type: Standard. Material: Steel. Fitment: Direct replacemen...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
Inner diameter 30mm. Outer diameter 48mm. Width 14mm.
Replacement for FEW M48, M76, D92; Daiichi DM78, M76, DM79K, DH31, DN52, DM69; Honda OE 30202-041-015; Yamaha OE 1K8-81321-20, 120-81321-20,...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. The RXP ch...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Bore size 47.00mm. Gudgeon pin outer diameter 12mm. Crown height 24mm. Piston length 56mm. Ring peg position 32.5mm. 2 stroke. Without ports...
Bore size 48.00mm. Gudgeon pin outer diameter 12mm. Crown height 24mm. Piston length 56mm. Ring peg position 32.5mm. 2 stroke. Without ports...
Made in Japan. Replacement aftermarket part for the following OEM numbers: Yamaha 296-81325-20-00, 296-81325-90-00, 104-81326-20-00, 116-813...
Bore size 47.50mm. Gudgeon pin outer diameter 12mm. Crown height 24mm. Piston length 56mm. Ring peg position 32.5mm. 2 stroke. Without ports...
Many models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many others may use a longer HT lead than this one at 280mm which is non-r...
