316L stainless steel. Suitable for Heng Tong calipers. Piston outer diameter 30mm. Piston length 32mm. This kit includes a single piston wit...
Suitable for Heng Tong calipers. Piston outer diameter 30mm. Piston length 32mm. This kit includes a single piston with matching internal oi...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Koyo 62/22. Outer diameter 50mm. Inner diameter 22mm. Width 14mm. Made in Japan.
Outer length: 860mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm adjuster. Inner overhang: 66mm. Inner top nipple: barrel...
Steel sprocket ID including splines: 15mm. ID without splines: 17mm. Gap between each spline: 4mm. Bolt hole centres: 28mm and 30mm. Number ...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
Outer diameter 56mm. Inner diameter 28mm. Width 8mm.
Terminal position guide: terminal positions are described like a clock face when looking directly at the terminal end of the coil as shown i...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF253.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
2 spade connectors. Comes with spring. Replacement aftermarket part for the following OEM numbers: Honda 35350-166-003, 35350-166-000, 35350...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF253.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 12.7mm (1/2") reach. Standard 2.5mm copper core cent...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
6 wires. Male block connector with male spades. 2 keys included.
Brand: JT Sprockets. Position: Rear. Tooth Count: 45. JT Part Number: JTR239.45. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 47. JT Part Number: JTR239.47. Type: Standard. Material: Steel. Fitment: Direct replacemen...
This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x Thickness 12.5mm...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x T...
Inner diameter 24mm. Outer diameter 41mm. Width 12.5mm.
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. This kit contains an inner oil seal...
Piston outer diameter 30mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Inner diameter 22.5mm. Outer diameter 41mm. Width 12.5mm.
Each mirror has right hand thread. Mirror glass outer diameter 100mm. 155mm stem length from mirror to bend. 60mm from bend to end of thread...
Includes all bearings and seals. Heavy duty tapered roller bearings. Direct replacement for OEM bearings. Upgrade replacement for ball style...
Outer diameter 41.00mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...
