Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Robust, lightweight, and weather resistant. Complete with bulbs and wiring. Fits front left & right & rear left & right. Include...
Wire length: 30cm. Female bullet connectors to 2 female small bullet connectors with white outer casing.
Hendler Emergency Bulb Pack Includes H4 Headlight, Indicator, Stop & Tail Bulbs & Fuses.
Rear 8mm bolt mount. Length 28mm. Width 15mm tapering down to 10mm.
Depending on the provided OEM numbers these bulbs fit many motorcycle & scooter instrument panels mainly Speedometer & Tachometer (R...
Lens size 110mm x 75mm. Replacement lens for 019340.
This bulb holder takes the following bulbs which are 10mm wide at the base: 6V 3W medium capless bulbs - SKU: 018295. 12V 3.4W medium caples...
Please Note: There is no sidelight in this headlight which is only fitted with headlight bulb 6V 25/25W MPF. No Shell comes as per image. He...
These resistors are simply connected in series to each indicator, creating correct indicator flash rate without needing to replace the origi...
Push-in rubber type. Fits a 12mm hole. This clock light bulb holder takes the following bulbs which are 10mm wide at base: 6V 3W medium capl...
Length: 110mm. Height: 75mm. Replacement lens SKU: 019246. Replacement aftermarket part for Yamaha OEM 3GW-84710-00, 1M1-84510-60, 1Y8-84510...
Suitable for brackets with the following part numbers: 018339, 018343, 018342.
Headlight 'W' clips to hold the reflector to the rim.
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39mm. Uses of Large T15 Capless We...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
These lenses fit the following OEM indicators: Aprilia AP8127783, AP8127784. and many more TBA. Replacement aftermarket part for for the fol...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Push-in rubber type. Fits a 12mm hole. This side light bulb holder takes the following bulbs which are 10mm wide at base: 6V 3W medium caple...
Width: 127mm. Height: 90mm. Depth: 63mm. Compatible with Stanley H-120, HM-12RC, HM-15RC. Replacement aftermarket part for for the following...
Bulbs type MPF (Mini Pre Focus). 15.5mm inner diameter. Three wires. Green = earth. White = low beam. Blue = high beam. This bulb holder tak...
Fits Front Left & Front Right + Rear Left & Rear Right. 10mm thread for mounting. 95mm stem length. Can be fitted to our indicator S...
Suitable for 30mm to 39mm fork stanchions. Finish: chrome. Stem hole size: 10mm. Comes with mounting nut and bolt.
Centre to centre of screw mounting holes: 62mm. Outer diameter of where this lens connects to the indicator: 71mm. Replacement aftermarket p...
