High and low.
Thread 8mm. Pitch 1.25mm. Replacement part for Honda OEM 35500-MJ4-024, 35500-MB9-004.
2 wires. Width 20mm. Fits 7/8" handlebars. Replacement part for Yamaha OEM 5TJ-83976-12.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Replacement part for Honda OEM 36100-MN4-008 CF138
Replacement for the following OEM numbers: Honda 35340-MA5-671, 35340-ML7-000, 35340-MM5-600, 35340-MY5-860, . Kawasaki 27010-1170, 27010-00...
Replacement for FEW M48, M76, D92; Daiichi DM78, M76, DM79K, DH31, DN52, DM69; Honda OE 30202-041-015; Yamaha OE 1K8-81321-20, 120-81321-20,...
Thread 6mm. Pitch 1mm.
Single bolt hole mount. Outer diameter 75mm. 100 dB. Made in Japan.
Outer diameter: 5mm. Length: 1 metre. Colour: black. Copper core.
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a higher rating. Replacement par...
Everything you need is included in this easy to fit buzzer kit. Simply connect the red wire to the indicator positive one side and the black...
Yellow. 14mm.
60mm between centres of bolt holes. 11 splines. Shaft OD 7.5mm. Shaft length 9mm.
Black PVC covering. 9 strand. Length 50 metres. Outer diameter 2.5mm.
6v to 12v CDI ignition coil. 1 spade terminal. Centre-to-centre distance between mounting holes: 55mm. Single HT lead. HT lead length 350mm....
Please Note: Cable is 180mm in total length from switch to block connector. 5 wires with male spade block connector. 2 keys included.
Thread 10mm. Pitch 1.25mm. Replacement part for Honda OEM 35600-MS9-600, 35600-MAW-600, 35600-KE6-600.
Please Note: There are no wiring instructions. Left hand handlebar switch. Lights high-low, indicator and horn switches. 30mm wide. Fits 7/8...
Includes clamp. Fits 7/8" handlebars. Width 30mm. 3 wires. Classic British bike style.
Replacement part for Honda OEM 35340-MA5-671, 35340-ML7-000, 353400-MM5-600.
Fits NGK B series plugs with threaded terminals. 90 degree elbow. 14mm. 5 kilo ohm. Terminal stud. Water resistant, vibration resistant and ...
4 pin block connector. Replacement part for Kawasaki OEM 27002-1065.
2 wires. Width 20mm. Fits 7/8" handlebars. Replacement part for Yamaha OEM 1C3-83976-00.
Single bolt mounting. 2 wires with spade connectors. Replacement part for the following OEM numbers: Honda 31700-045-671, 32800-07071. Suzuk...
This CDI is the same as Shindengen MM9 CI558. This item is NOT suitable for the XL600V 1988 model if your CDI unit is a Shindengen MM9 CI529...