Honda XL100 S 1983 Parts

15 Tooth Front Sprocket - 003306

Steel sprocket. Replaces JT Sprockets JTF274-15.

14 Tooth Front Sprocket - 003175

Steel sprocket. Replaces JT Sprockets JTF274-14.

Motobatt MBT6N4 AGM Sealed Battery 6N4-2A 6N4C-1B 6N42A 6N4-2A-4A

Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...

4 Wire Ignition Switch - 006660

4 wires with male spade block connector. 2 keys included.

12v AC Ignition Coil & Condenser Single Output (60mm)

12v AC ignition coil. 1 fixed wire with bullet connector. Centre-to-centre distance between mounting holes: 60mm. Single Output. Primary res...

NGK CR7HS Spark Plug

Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 7. 12.7mm (1/2") reach. Standard 2.5mm copper core cent...

JT Sprockets 15 Tooth Front Sprocket JTF274.15

Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF274.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...

Steering Head Ball Bearing Kit - 013072

This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x Thickness 12.5mm...

11mm x 7.75mm x 5.3mm Valve Stem Oil Seals

Outer diameter 11mm. Inner diameter 7.75mm. Stem 5.3mm.

Speedo Cable Honda 44830415610 44830356010 44830KPL900 (960mm)

Length: 38" (960mm). Other lengths are available 1060mm SKU: 015925 840mm SKU: 015905. Clock fit: screw-over 11mm. Bottom end: push-in ...

25H Timing Cam Chain Rivet Link

Fits cam chains supplied by us only.

Steering Head Taper Bearing Kit SSH050 (Japanese)

Made in Japan. This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x T...

IRIS 428RX-118 Nickel Super Heavy Drive Chain

This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...

24mm x 41mm x 12.5mm Steering Head Bearing

Inner diameter 24mm. Outer diameter 41mm. Width 12.5mm.

22.5mm x 41mm x 12.5mm Steering Head Bearing

Inner diameter 22.5mm. Outer diameter 41mm. Width 12.5mm.

DID 428D-118L Gold Standard Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

RK 428-118L HSB Heavy Duty Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...

DID 428D-118L Black Standard Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

Chrome Round Mirrors 8mm C50 C70 C90 88110-126-751 08810-126-751

Early Honda style. Right-handed 8mm clockwise thread. Glass outer diameter 95mm. Total outer diameter 103mm. Stem length 148mm. 70mm from be...

RK 428-118L HSB Heavy Duty Gold Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...

All Balls 25-1300 Wheel Bearing Kit

All Balls 22-1002 Steering Head Bearing & Seal Kit

Includes all bearings and seals. Heavy duty tapered roller bearings. Direct replacement for OEM bearings. Upgrade replacement for ball style...

Con Rod Kit - 008412

This kit includes the following parts: Con rod. Gudgeon pin. Big end needle bearing.

NGK LD05F Red Spark Plug Cap

Fits NGK D series plugs with threaded terminals. 90 degree elbow. 10-12mm. 5 kilo ohm. Terminal stud. Water resistant, vibration resistant a...

Condenser Ref. DKO-13

Replacement for DKO-13, Honda OE 30250-330-003.

16 Tooth Front Sprocket - 003447

Steel sprocket. Replaces JT Sprockets JTF274-16.

JT Sprockets 14 Tooth Front Sprocket JTF274.14

Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF274.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...