This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Upper or Lower depending on whether standard or USD forks. Outer diameter 41.75mm. Inner diameter 39.75mm. Width 19.8mm. Thickness 1mm. Repl...
Outer diameter 11mm. Inner diameter 7.75mm. Stem 5.3mm.
Length: 38" (960mm). Other lengths are available 1060mm SKU: 015925 840mm SKU: 015905. Clock fit: screw-over 11mm. Bottom end: push-in ...
Upper or Lower depending on whether standard or USD forks. Outer diameter 41.5mm. Inner diameter 39.5mm. Width 20mm. Thickness 1mm.
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 15mm. Thickness 2mm.
This kit includes the following bearings: Bearing 1: ID 26mm x OD 47mm x Thickness 15mm. Bearing 2: ID 26mm x OD 47mm x Thickness 15mm.
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. This kit contains an inner oil seal...
Note: The original relay for many of the Suzuki models (OEM #38610-45031) have the terminals pointing down but this one has the terminals or...
Outer diameter 20.50mm. Length 45.00mm. Thickness 2.60mm. Heavy duty clutch springs.
Piston outer diameter 30mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
108mm ID. 125mm OD without pegs. 136mm OD with pegs. 14mm width of peg. Number of pegs 10. 3.0mm thickness. Replacement for Vesrah VP1034. R...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 26mm x OD 47mm x Thickness 15mm. Bearing 2: ID 26mm x OD 47mm x Thick...
Height 38mm. Width 50mm. Replacement for Hiflofiltro HF112, HF113; Champion X301. This filter does not come with an O-ring. Replacement afte...
For use on 12v bulbs upto 23w.
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
Thread 12mm x hex 18mm x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium ...
Steel sprocket. Replaces JT Sprockets JTR300-43.
