Some bikes have one single pull throttle cable while others have two which are: Throttle Cable A or 1 = (Pull). Throttle Cable B or 2 = (Pus...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Red bodied (exactly the same coil as the black coil SKU: 005154). 6v to 12v CDI ignition coil. 2 spade terminals. The spade with black plast...
Replacement aftermarket part for Honda OEM 53178-GFW-305, 53178-GN1-A00.
Steel sprocket ID including splines: 15mm. ID without splines: 17mm. Gap between each spline: 4mm. Bolt hole centres: 28mm and 30mm. Number ...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 7. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF253.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF253.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Steel sprocket. Replaces JT Sprockets JTR214-36.
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 7. 12.7mm (1/2") reach. Standard 2.5mm copper core cent...
Made in Japan.
Brand: JT Sprockets. Position: Rear. Tooth Count: 36. JT Part Number: JTR1214.36. Type: Standard. Material: Steel. Fitment: Direct replaceme...
This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x Thickness 12.5mm...
Koyo 6201DDU. Double sided rubber sealed. Outer diameter 32mm. Inner diameter 12mm. Width 10mm. Made in Japan. Replacement aftermarket part ...
Replacement aftermarket part for the following OEM numbers: Honda: 22870-GN1-A50, 22870-GN1-000, 22870-KN4-A60, 22870-KN4-000. and many more...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x T...
Inner diameter 24mm. Outer diameter 41mm. Width 12.5mm.
Inner diameter 22.5mm. Outer diameter 41mm. Width 12.5mm.
This wheel bearing kit uses premium quality Japanese Koyo bearings.
Includes all bearings and seals. Heavy duty tapered roller bearings. Direct replacement for OEM bearings. Upgrade replacement for ball style...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Fits NGK D series plugs with threaded terminals. 90 degree elbow. 10-12mm. 5 kilo ohm. Terminal stud. Water resistant, vibration resistant a...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF253.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
