The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 520VX...
This kit includes only the items shown in the image. This may or may not be enough for your vehicle depending on its model. Please check bef...
Upper or Lower depending on whether standard or USD forks. Outer diameter 52mm. Inner diameter 48.1mm. Width 20mm. Thickness 1.95mm.
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs.
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs. Works Racing Parts (WRP)The WRP brand relies o...
The non-sealed 520MX boasts our highest rated tensile strength among non-sealed chains at 8,930 lbs. and properly handles the beating that c...
Steel sprocket. ID: 125mm. PCD (Pitch Circle Diameter): 150mm. Bolt hole OD: 8.5mm. Number of bolt holes: 6. Pitch: 520. Indent: N/A. Replac...
Teeth: 47. Pitch: 520. Inner diameter: 125mm. Bolt hole diameter: 8.5mm. Centre-to-centre distance between bolt holes: 150mm. CNC machined f...
Includes two caliper pistons. Does not include seals. Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship prog...
Teeth: 45. Pitch: 520. Inner diameter: 125mm. Bolt hole diameter: 8.5mm. Centre-to-centre distance between bolt holes: 150mm. CNC machined f...
Teeth: 51. Pitch: 520. Inner diameter: 125mm. Bolt hole diameter: 8.5mm. Centre-to-centre distance between bolt holes: 150mm. CNC machined f...
Teeth: 48. Pitch: 520. Inner diameter: 125mm. Bolt hole diameter: 8.5mm. Centre-to-centre distance between bolt holes: 150mm. CNC machined f...
Teeth: 49. Pitch: 520. Inner diameter: 125mm. Bolt hole diameter: 8.5mm. Centre-to-centre distance between bolt holes: 150mm. CNC machined f...
Replacement aftermarket part for the following OEM numbers: KTM 580.38.005.000, 580.38.005.100, 580.38.005.101, 901.38.015.000. This will su...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR897.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 46. JT Part Number: JTR897.46. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Height 69mm. Width 41mm. Replacement for Hiflofiltro HF155, Champion X320. This filter does not come with an O-ring. This will suit the foll...
Equivalent to Twin Air 158188. This will suit the following models as well as those listed in fitments: Husaberg All 4-Stroke Models 2000-03...
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine w...
NOTE: This switch is not supplied with a model-specific moulded plug. It has male spade terminals fitted and matching female terminals inclu...
12V 6.5AH 100 CCA. Terminals: 2 (1 positive + 1 negative). Complete with battery terminals & connections. Length: 114mm x Width: 70mm x ...
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.7-0.8mm ga...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF823.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand cross reference: Vesrah VD947, 181, 245, Ferodo FDB2018, SBS671, DP617. You may need more than a single pair of pads if you have twin ...
Upper or Lower depending on whether standard or USD forks. Outer diameter 48.8mm. Inner diameter 46.8mm. Width 20mm. Thickness 1mm.
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
