Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF422.12. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 9. Reach 19mm (3/4"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm g...
Brand: JT Sprockets. Position: Front. Tooth Count: 11. JT Part Number: JTF421.11. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF422.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Rear. Tooth Count: 52. JT Part Number: JTR460.52. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 53. JT Part Number: JTR460.53. Type: Standard. Material: Steel. Fitment: Direct replacemen...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
The K60 M+S Silica (SiO2)The proven K60 design combined with Heidenau's silica winter compound, make for a tyre that stands up to mud and sn...
Thread 8mm. Spanner size 12mm.
Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.
Koyo 32005X. Inner diameter 25mm. Outer diameter 47mm. Width 15mm. Made in Japan. Bearing seal SKU: 013248. Replacement aftermarket part for...
Outer diameter 21mm. Inner diameter 16mm. Length 19.5mm.
Comes with rivet link, no split link but these can be found under split links via search. This will suit the following models as well as tho...
Base Type: N2 H290701. This will suit the following models as well as those listed in fitments: Honda ATC200 1984-86. Honda ATC200 M 1984-85...
RK is the leading manufacturer of OEM motorcycle drive chain to all major Japanese manufactures. With over 40 years of supply to the largest...
This chain comes with a split link. This will suit the following models as well as those listed in fitments: KTM 125 Duke ABS 2020-24. KTM 1...
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings.
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. RK XSO Series: Designed for Basic Motorcy...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
This kit includes the following bearings: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 25mm x OD 47mm x Thickness 15mm.
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 25mm x OD 47mm x Thick...
This will suit the following models as well as those listed in fitments: KTM 125 Duke ABS 2020-24. KTM 125 RC 2021-24. KTM 200 RC 2021. KTM ...
Fits NGK B series plugs with threaded terminals. 90 degree elbow. 14mm. 5 kilo ohm. Terminal stud. Replacement aftermarket part for the foll...
The non-sealed 520MX boasts our highest rated tensile strength among non-sealed chains at 8,930 lbs. and properly handles the beating that c...
Height 56mm. Width 54mm. Replacement for Hiflofiltro HF123, Champion X310. This filter does not come with an O-ring. This will suit the foll...
Equivalent to LB05F. Fits NGK B series plugs with threaded terminals. 90 degree elbow. 14mm. 5 kilo ohm. Terminal stud. Replacement aftermar...
