Kawasaki KH125 A 1977 Parts

40mm x 20mm x 7mm Crank Oil Seal

Outer diameter 40mm. Inner diameter 20mm. Width 7mm.

6V 5W BA15s Indicator Bulbs

Chrome Round Mirrors 8mm/10mm 56500-28601 56500-08010 56500-45640 56500-22011

These mirrors will fit any bike with an 8mm or 10mm right hand thread (clockwise) each side, left or right. Stem length: 190mm centre to cen...

6V 35/35W Bosch Type Headlight Bulbs

Indicator Kawasaki 23040-054 23040-1024 23040-1004 23040-1043

Fits Front Left & Front Right + Rear Left & Rear Right . Chrome body. Robust, lightweight, and weather resistant. Complete with bulb...

Chrome Round Mirrors with 10mm Thread - 011957

Glass outer diameter 110mm. 190mm stem length from centre of mirror to bend. 50mm from bend to end of thread. E-marked. Replacement aftermar...

6V 45/40W Bosch Type BA20D Headlight Bulbs

Bosch Type BA20D bulb holder use our SKU: 018112.

NGK BR8EIX Iridium Spark Plug (Japan)

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...

NGK LB05F Black Spark Plug Cap

Fits NGK B series plugs with threaded terminals. 90 degree elbow. 14mm. 5 kilo ohm. Terminal stud. Replacement aftermarket part for the foll...

122mm x 122mm Rear Light (Taillight) Lens

Lens size 122mm x 122mm.

37mm x 25mm x 6mm Drive Shaft Oil Seal

Outer diameter: 37mm. Inner diameter: 25mm. Width: 6mm.

20mm x 12mm x 5mm Gear Lever Oil Seal

Outer diameter 20mm. Inner diameter 12mm. Width 5mm.

Kickstart Lever - 014160

Shaft size 13mm. Length 155mm.

Clutch Cable - 013811

Outer length: 1010mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm stepped ferrule. Additional fittings info: long step. A...

Hendler Chrome Teardrop Mirrors with 10mm Thread (Clockwise Thread)

Pair of chrome mirrors suitable for any bike that have a 10mm clockwise thread on the left and the right. Left hand mirror has 10mm x 1.25mm...

Speedo Cable Kawasaki 54001-1031 54001-1007 (710mm)

Length: 28" (710mm). Clock fit: screw-over 11mm. Wheel end: screw-over 10mm. Type: square/fork. Replacement aftermarket part for the fo...

Amber Indicator Lens - 018492

DID 428D-112L Black Standard Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

40mm x 25mm x 7mm Crank Oil Seal

Outer diameter 40mm. Inner diameter 25mm. Width 7mm.

110mm x 30mm Brake Shoes - 001898

Outer diameter 110mm. Width 30mm. How to measure drum brake shoes: Outer Dimension: Preferably use a caliper although a tape measure would g...

55mm x 42mm x 9mm Wheel Oil Seal

Outer diameter 55mm. Inner diameter 42mm. Width 9mm.

RK 428-112L HSB Heavy Duty Gold Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...

RK Pro-MX 428-112L MXZ Heavy Duty Gold Drive Chain

Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...

MTX 428HD-112 Gold Heavy Duty Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...

Alloy Clutch Lever - 015002

DID 428HD-112L Heavy Duty Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

DID 428HD-112L Gold Heavy Duty Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

47 Tooth Rear Sprocket - 004440

Steel sprocket. Replaces JT Sprockets JTR810-47.

43 Tooth Rear Sprocket - 004156

Steel sprocket. Replaces JT Sprockets JTR810-43.

46 Tooth Rear Sprocket - 004366

Steel sprocket. Replaces JT Sprockets JTR810-46.