Kawasaki KH125 L 1986 Parts

Hendler Chrome Teardrop Mirrors with 10mm Thread (Clockwise Thread)

Pair of chrome mirrors suitable for any bike that have a 10mm clockwise thread on the left and the right. Left hand mirror has 10mm x 1.25mm...

Speedo Cable Kawasaki 54001-1031 54001-1007 (710mm)

Length: 28" (710mm). Clock fit: screw-over 11mm. Wheel end: screw-over 10mm. Type: square/fork. Replacement aftermarket part for the fo...

40mm x 25mm x 7mm Crank Oil Seal

Outer diameter 40mm. Inner diameter 25mm. Width 7mm.

DID 428D-110L Black Standard Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

Black Brake Lever 53175-KBW-900

Replacement aftermarket part for the following OEM numbers: Honda 53175-KBW-900. This will suit the following models as well as those listed...

RK 428-110L HSB Heavy Duty Gold Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...

RK Pro-MX 428-110L MXZ Heavy Duty Gold Drive Chain

Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...

RK 428-110L HSB Heavy Duty Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...

Black Clutch Lever - 015006

MTX 428HD-110 Gold Heavy Duty Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...

99mm x 1.6mm Clutch Metal Plate with 30 Pegs

Outer diameter 99mm. Thickness 1.6mm. Number of pegs 30.

107mm x 3.2mm Clutch Friction Plate with 8 Pegs

Outer diameter (including teeth) 107mm. Thickness 3.2mm. Number of pegs 8. Replacement for Vesrah VP4038.

DID 428HD-110L Heavy Duty Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

6v AC Ignition Coil Single Output + 1 Wire (55mm)

Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...

Hendler 6v AC Ignition Coil Single Output (55mm)

Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...

HiFlo HFA2201 Air Filter Kawasaki 11013-1062

Replacement aftermarket part for the following OEM numbers: Kawasaki 11013-1062. This will suit the following models as well as those listed...

6v 2-Pin 23 Watt Indicator Relay 38300-GF0-405

For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...

15 Tooth Front Sprocket - 003348

Steel sprocket. Replaces JT Sprockets JTF418-15.

14 Tooth Front Sprocket - 003212

Steel sprocket. Replaces JT Sprockets JTF418-14.

NGK B8ES Spark Plug (Japan) (Non-Resistor)

Non-resistor type. Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 8. Reach 19mm (3/4"). Standard 2.5mm copper core centre ele...

Hendler 37 Tooth Rear Sprocket - 003736

Steel sprocket. Replaces JT Sprockets JTR458-37.

JT Sprockets 15 Tooth Front Sprocket JTF418.15

Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF418.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...

Hendler 36 Tooth Rear Sprocket - 003707

Steel sprocket. Replaces JT Sprockets JTR458-36.

JT Sprockets 14 Tooth Front Sprocket JTF418.14

Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF418.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...

Engine Gasket Set - 010131

This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...

JT Sprockets 37 Tooth Rear Sprocket JTR458.37

Brand: JT Sprockets. Position: Rear. Tooth Count: 37. JT Part Number: JTR458.37. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 36 Tooth Rear Sprocket JTR458.36

Brand: JT Sprockets. Position: Rear. Tooth Count: 36. JT Part Number: JTR458.36. Type: Standard. Material: Steel. Fitment: Direct replacemen...

Rear Sprocket Bolt & Tab Set

Includes 2 tabs, 4 bolts and 4 nuts.

46mm x 37mm x 5mm Copper Exhaust Gasket

Outer diameter 46mm. Inner diameter 37mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...

15mm x 1mm Piston Circlips