Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Length: 37" (940mm). Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square/fork. Note: For a longer speedo cable use 41&...
Length: 24.5mm. Width: 12.5mm. Thickness: 12.5mm. Replacement aftermarket part for Kawasaki OEM 9206-6056, 92066-1011, 92066-1111.
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
Fits cam chains supplied by us only.
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 13610-438-004. Kawasaki 13122-007.
Inner diameter: 30mm. Outer diameter: 52mm. Width: 1.5mm.
Upper or Lower depending on whether standard or USD forks. Outer diameter 41.5mm. Inner diameter 39.5mm. Width 20mm. Thickness 1mm.
If these bulbs are showing out of stock you could always use SKU: 018217 which includes one amber and one clear 12V 23W BA15s bulb or use SK...
Koyo 32005X. Inner diameter 25mm. Outer diameter 47mm. Width 15mm. Made in Japan. Bearing seal SKU: 013248. Replacement aftermarket part for...
Kit contains a pair of fork dust seals.
Piston outer diameter 27mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. Rep...
Made in Japan. Replaces Suzuki 43028-1058.
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs.
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Made in Japan. Fit Japan...
Inner diameter 28mm. Outer diameter 52mm. Width 16mm.
Kit contains a pair of fork oil seals.
Please note: for models that have 14mm pins you will need to add 14mm bushes to your cart SKU: 019917. Suitable for early Japanese motorcycl...
This kit includes the following bearings: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 28mm x OD 52mm x Thickness 16mm.
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 28mm x OD 52mm x Thick...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Piston outer diameter 34mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Made in Japan. Fit Japan...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 12mm. Thickness 2mm.
Height 58mm. Width 76mm. Replacement for Hiflofiltro HF401, HF192; Champion X303. This filter does not come with an O-ring. This will suit t...
Please Note: This oil filter does not come with O-rings. Replacement for Hiflofiltro HF401, HF192; Champion X303. This will suit the followi...
Outer diameter 230mm. Inner diameter 100mm. 4 bolt holes. 10mm bolt holes. Non-countersunk. Made in Japan.
