Brand: JT Sprockets. Position: Rear. Tooth Count: 38. JT Part Number: JTR897.38. Type: Standard. Material: Steel. Fitment: Direct replacemen...
VD05F-B (8052). Fits NGK D series plugs with threaded terminals. 120 degree elbow long type. 10-12mm. 5 kilo ohm. Terminal stud. Red version...
Outer diameter 134.5mm. Thickness 1.4mm. Number of pegs 24.
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine w...
Steel sprocket. Replaces JT Sprockets JTF1901-15.
12V 6.5AH 100 CCA. Terminals: 2 (1 positive + 1 negative). Complete with battery terminals & connections. Length: 114mm x Width: 70mm x ...
As: RC19-032. Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating...
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.7-0.8mm ga...
Replacement aftermarket part for the following OEM numbers: KTM 590.38.046.000, 590.38.046.100, 590.38.046.101, 590.38.046.144. This will su...
Height 52mm. Width 41mm. Replacement for Hiflofiltro HF157, Champion X335. This filter does not come with an O-ring. This will suit the foll...
The K60 M+S Silica (SiO2)The proven K60 design combined with Heidenau's silica winter compound, make for a tyre that stands up to mud and sn...
Brand cross reference: Vesrah VD947, EBC 181, EBC 245, Ferodo FDB2018, SBS671, DP617. You may need more than a single pair of pads if you ha...
Thread 8mm. Spanner size 12mm.
Please Note: These are not suitable for flat sided Keihin carbs. Made in Japan.
This will suit the following models as well as those listed in fitments: KTM 400 EXC 2006-07. KTM 400 LC-4 (3 Hole Air Filter) 2001-04. KTM ...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 29mm x OD 50.25mm x Thickness 15mm. Bearing 2: ID 29mm x OD 50.25mm x...
Steel sprocket. ID: 125mm. PCD (Pitch Circle Diameter): 150mm. Bolt hole OD: 8.5mm. Number of bolt holes: 6. Pitch: 520. Indent: N/A. Replac...
Upper or Lower depending on whether standard or USD forks. Outer diameter 48.5mm. Inner diameter 46.5mm. Width 20mm. Thickness 1mm.
Inner diameter 29mm. Outer diameter 50.25mm. Width 15mm.
Outer diameter 17.70mm. Length 43.00mm. Thickness 2.50mm. Heavy duty clutch springs.
Includes all bearings and seals. Heavy duty tapered roller bearings. Direct replacement for OEM bearings. Upgrade replacement for ball style...
Equivalent to Twin Air 154112. This will suit the following models as well as those listed in fitments: KTM 400 EXC 2006-07. KTM 400 LC-4 (3...
Please Note: This oil filter does not come with O-rings. 69mm. Replacement for Hiflofiltro HF155, Champion X320. This will suit the followin...
Teeth: 48. Pitch: 520. Inner diameter: 125mm. Bolt hole diameter: 8.5mm. Centre-to-centre distance between bolt holes: 150mm. CNC machined f...
Brand: JT Sprockets. Position: Rear. Tooth Count: 46. JT Part Number: JTR897.46. Type: Standard. Material: Steel. Fitment: Direct replacemen...
VD05F-R (8376) . Fits NGK D series plugs with threaded terminals. 120 degree elbow long type. 10-12mm. 5 kilo ohm. Terminal stud. Black vers...
