Outer length: 1100mm. Outer top fitting: 90' bend. Outer bottom fitting: 7mm stepped ferrule. Additional outer info: middle adjuster spring ...
Fits 7/8" handlebars.
TUV approved. Made from ultra strong and lightweight 7075-T6 aluminium. Patented taper-wall construction. 28.6mm clamping area diameter. Ano...
Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
Overall width: 28". Centre width: 7". Pull back: 10". Rise: 10". Diameter: 7/8". Colour: Chrome. Knurls: Yes. Open ...
As well as models below check in fitments for your Kawasaki model and ensure shaft details are a match. Shaft size: 19mm. Fine spline: 23 te...
10mm spline size. 120mm length, which is a vertical straight line from inside centre of spline to the inside centre of toe peg.
Length: 28" (710mm). Clock fit: screw-over 11mm. Wheel end: screw-over 10mm. Type: square/fork. Replacement aftermarket part for the fo...
Length: 21.5" (550mm). Clock fit: screw over 11mm. Tacho drive end: push in 15mm. Inner type: square/square.
Overall width: 34". Centre width: 9". Pull back: 8". Rise: 13". Diameter: 1". Colour: Chrome. Knurls: Yes. Black en...
12mm spline size. 120mm length, which is a vertical straight line from inside centre of spline to the inside centre of toe peg.
Made from 6082-T6 aluminium alloy. Taper-wall construction with crossbrace system for additional strengthening and sufficient flex. 28.6mm c...
Top outer length: 720mm. Top free inner length: 56mm. Top fitting: 90' bend, 20' side bend, housing locking tabs. Bottom 1 fitting: standard...
Outer length: 1060mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm adjuster. Inner overhang: 96mm. Inner top nipple: barre...
Developed and used by top MXGP riders. Made from ultra strong and lightweight 7075-T6 aluminium. Patented taper-wall construction with cross...
Length: 39" (990mm). Clock fit: Push-in clip type. Wheel end: screw-over 11mm. Type: square/square.
Some bikes have one single pull throttle cable while others have two which are: Throttle Cable A or 1 = (Pull). Throttle Cable B or 2 = (Pus...
Top outer length: 750mm. Top free inner length: 75mm. Top fitting: 90' bend, 6mm push-in, special locking plate. Bottom 1 fitting: 90' bend,...
Alloy Gear Lever with Folding Toe Peg. Replacement aftermarket part for Yamaha OEM 525-18111-00, 525-18111-00-93.
Length: 29" (740mm). Clock fit: screw over 11mm. Tacho drive end: screw over 15mm. Inner type: square/round.
Overall width: 33". Centre width: 9". Pull back: 8". Rise: 8". Height: 6". Diameter: 1". Colour: Chrome. Knurl...
