Top outer length: 720mm. Top free inner length: 56mm. Top fitting: 90' bend, 20' side bend, housing locking tabs. Bottom 1 fitting: standard...
Top outer length: 815mm. Top free inner length: 73mm. Top fitting: 90' bend, 6mm push-in, special locking plate. Bottom 1 fitting: 90' bend,...
12mm spline size. 115mm length, which is a vertical straight line from inside centre of spline to the inside centre of toe peg.
TUV approved. Made from ultra strong and lightweight 7075-T6 aluminium. Patented taper-wall construction. 28.6mm clamping area diameter. Ano...
As well as models below check in fitments for your Kawasaki model and ensure shaft details are a match. Shaft size: 19mm. Fine spline: 23 te...
Length: 28" (710mm). Clock fit: screw-over 11mm. Wheel end: screw-over 10mm. Type: square/fork. Replacement aftermarket part for the fo...
Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
Overall width: 33". Centre width: 9". Pull back: 8". Rise: 8". Height: 6". Diameter: 1". Colour: Chrome. Knurl...
Alloy Version. Replacement aftermarket part for Honda OEM 53175-399-700, 53175-116-690, 53175-149-000.
Total length: 180mm. Length from centre of pivot to end: 165mm. Replacement aftermarket part for the following OEM numbers: Kawasaki 46092-0...
Overall width: 27". Rise: from top to top of bar 11". Centre width: 7". Pullback: lay bars on flat surface and measure height...
Length: 21.5" (550mm). Clock fit: screw over 11mm. Tacho drive end: push in 15mm. Inner type: square/square.
Shaft size 13mm.
Top outer length: 940mm. Top free inner length: 53mm. Top fitting: 90' bend, 20' side bend, housing locking tabs. Bottom 1 fitting: standard...
Upgraded with folding toe peg. Quallity high-strength aluminum alloy. 18mm bore size. 135mm length, which is a vertical straight line from i...
Replacement aftermarket part for Triumph OEM T2046041. 4 Way adjustable alloy clutch lever for cable type clutch. This will suit the followi...
Length: 39" (990mm). Clock fit: Push-in clip type. Wheel end: screw-over 11mm. Type: square/square.
Overall width: 30". Centre width: 7". Pull back: 10". Rise: 9". Height: 4". Diameter: 7/8". Colour: Chrome. Kn...
Length: 29" (740mm). Clock fit: screw over 11mm. Tacho drive end: screw over 15mm. Inner type: square/round.
Made from 6082-T6 aluminium alloy. Taper-wall construction with crossbrace system for additional strengthening and sufficient flex. 28.6mm c...
Some bikes have one single pull throttle cable while others have two which are: Throttle Cable A or 1 = (Pull). Throttle Cable B or 2 = (Pus...
Length: 38" (970mm). Clock fit: screw over 15mm. Tacho drive end: screw over 15mm. Inner type: square/square.
Black Version. Replacement aftermarket part for Honda OEM 53175-399-700, 53175-116-690, 53175-149-000.
Overall width: 34". Centre width: 9". Pull back: 7". Rise: 8". Diameter: 7/8". Colour: Chrome. Knurls: No. Black en...
Developed and used by top MXGP riders. Made from ultra strong and lightweight 7075-T6 aluminium. Patented taper-wall construction with cross...
