18mm bore size. 280mm between bore and toe plate centres.
Please Note: This Kick Starter Arm Only Fits 16mm Shafts. This is the 16mm version. Please measure levers shaft prior to purchase. Number of...
Overall width: 24.5". Riser height: 5". Centre width: 7". Pullback: lay bars on flat surface and measure height from flat to ...
Top outer length: 840mm. Top free inner length: 106mm. Top fitting: 10mm thread. Bottom 1 fitting: 7mm stepped ferrule. Top nipple: pull cho...
Please Note: Longer version at 1090mm for fitments & OEM numbers listed. Standard length at 940mm use our SKU: 015962. Clock fit: screw-...
Fits 7/8" handlebars. Short lever. Decompressor lever.
Fits 7/8" handlebars.
Length 40mm. Push-over style. Open both ends. Oval fitting.
Check the dimensions of this throttle cable before placing an order because there's a couple of variations on some of the Suzuki GS models. ...
This lever fits many models on the right hand side as a brake lever & on the left hand side as a clutch or brake. Colour: Black. Alterna...
Suitable for clutch or rear brake cables with a standard barrel end. 10mm mirror boss right hand thread x 1.25mm pitch. Suitable for 7/8&quo...
TUV approved. Made from ultra strong and lightweight 7075-T6 aluminium. Patented taper-wall construction. 28.6mm clamping area diameter. Ano...
Outer cable length: 1000mm. Outer cable top fitting: standard ferrule. Outer cable bottom fitting: 8mm adjuster. Inner cable overhang: 140mm...
This gear lever is in a bright alloy finish which doesn't match the dull finish of the brake pedal SKU: 014229. 18mm bore size. 135mm length...
For installation of oversized bars on stock triple clamps. CNC machined aluminium. Complete with all mounting bolts. Works Racing Parts (WRP...
Developed and used by top MXGP riders. Made from ultra strong and lightweight 7075-T6 aluminium. Patented taper-wall construction with cross...
Overall width: 29.5". Rise: from top to top of bar 6". Centre width: 7". Clamp length: 180mm. Grip length: 250mm. Pullback: l...
Damper caps / aluminium vibration reducers. CNC machined from billet aluminium. Anodised finish to avoid corrosion. Works Racing Parts (WRP)...
Some bikes have one single pull throttle cable while others have two which are: Throttle Cable A or 1 = (Pull). Throttle Cable B or 2 = (Pus...
Please note: This cable is 780mm long which may be too short for your bike, if so please use SKU: 015983 which has an extra 100mm. Length: 3...
Top outer length: 560mm. Top free inner length: 51mm. Top fitting: 10mm thread. Bottom 1 fitting: standard ferrule. Top nipple: pull choke. ...
High quality cold-forged aluminium for maximum strength. OEM replacement design. Works Racing Parts (WRP)The WRP brand relies on two factors...
Clutch lever switch SKU: 006506. Replacement aftermarket part without switch for Yamaha 2C0-82910-00-00, 5EB-82910-0000, 5EB-82910-0100, 5EB...
Replacement aftermarket part for the following OEM numbers: BMW: 32727717295. Husqvarna: 800096830, 8000A4564. KTM: 54813002100, 54813002000...
Overall width: 34". Centre width: 10". Pull back: 8". Rise: 20". Diameter: 1". Colour: Chrome. Knurls: No. Black en...
14mm spline size. Number of splines 26. 110mm length, which is a vertical straight line from inside centre of spline to the inside centre of...
Replacement aftermarket part for the following OEM numbers: Kawasaki 13064-0069, 13064-0073, 13064-1188, 13064-0081. and many more TBA. This...
Outer cable 1200mm. Overhang 100mm. Replacement aftermarket part for Yamaha OEM 1M1-26341-00, 498-26341-00, 498-26341-01, 15A-26341-00, 498-...
Push-over style. Open both ends.
