Outer length: 825mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm stepped ferrule. Additional fittings info: long step. Ad...
Straight length 150mm. Replacement aftermarket part for Suzuki OEM 26300-39300, 26300-39100, 26300-39101
Developed and used by top MXGP riders. Made from ultra strong and lightweight 7075-T6 aluminium. Patented taper-wall construction with cross...
Overall width: 34". Centre width: 7". Pull back: 8". Rise: 16". Height: 10". Diameter: 1". Colour: Chrome. Knu...
Top outer length: 510mm. Bottom 1 outer length: 275mm. Bottom 2 outer length: 275mm. Top free inner length: 52mm. Bottom 1 free inner length...
Outer cable length: 700mm. Outer top fitting: plain outer. Outer bottom fitting: standard ferrule. Inner cable overhang: 105mm. Inner cable ...
18mm bore size. 140mm length, which is a vertical straight line from inside centre of bore to the inside centre of toe peg.
10mm spline size. 120mm length, which is a vertical straight line from inside centre of spline to the inside centre of toe peg.
Length: 42" (1060mm). Clock fit: screw-over 11mm. Wheel end: push-in 10mm gun sight screw. Type: square/fork. Longer cable, 1270mm use ...
Please Note: This cable is 41" (1040mm) so check yours before ordering. Length: 41" (1040mm). Shorter length use our 34" (860...
This will suit the following models as well as those listed in fitments: Gilera Runner FX 125 (2T) 1997. Gilera Runner SP 50 (2T) 2011-12. G...
Replacement aftermarket part for Yamaha OEM Yamaha 4GY-83912-00, 1B2-H3912-00.
Shaft size: 16mm. Length: 200mm. Peg length: 50mm. Pivoting knuckle. Includes pinch bolt. Replacement aftermarket part for the following Kaw...
Please Note: The ball end of this clutch lever is small so if purchasing our brake lever SKU: 014396 with a large ball end they will not mat...
Length: 34" (870mm). Clock fit: screw-over 11mm. Wheel end: push-in 10mm gun sight screw. Type: square/fork.
Overall width: 30". Centre width: 6". Pull back: 10". Rise: 6". Height: 4". Diameter: 1". Colour: Chrome. Knur...
Top outer length: 670mm. Top free inner length: 75mm. Top fitting: 10mm thread. Bottom 1 fitting: standard ferrule. Top nipple: lift choke. ...
Outer length: 1055mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm adjuster. Inner overhang: 78mm. Inner top nipple: barre...
Finish: Black. Position: Left-Hand. Alloy Version: use our SKU: 014628. Replacement aftermarket part for the following OEM numbers: Aprilia,...
Fits 7/8" handlebars. No mirror boss.
Some bikes have one single pull throttle cable while others have two which are: Throttle Cable A or 1 = (Pull). Throttle Cable B or 2 = (Pus...
Overall width: 27". Centre width: 5". Rise: 10". Diameter: 7/8". Colour: Chrome. Knurls: No. Black end caps. Please do n...
Fits 7/8" handlebars. 10mm mirror boss.
12mm spline size. 125mm length, which is a vertical straight line from inside centre of spline to the inside centre of toe peg.
Overall width: 34". Centre width: 9". Pull back: 8". Rise: 18". Diameter: 1". Colour: Chrome. Knurls: No. Black end...
Please Note: This speedo cable is 900mm (35.5") long so you may require a shorter version as listed below: Length: 35.5" (900mm). ...
TUV approved. Made from ultra strong and lightweight 7075-T6 aluminium. Patented taper-wall construction. 28.6mm clamping area diameter. Ano...
