Motorcycle Handlebars & Controls

Upper & Lower Throttle Assembly

Heated Handlebar Grips Control Unit for 014274

Handlebar Riser Bolts

1/2" UNF. Suitable for handlebar risers with the following part numbers: 015191, 015193, 015197.

Chrome 7/8" Clip-On Handlebars for 35mm Forks

Chromed steel bars with a slight drop. Bar length: 300mm. Suitable for fork tubes with a 35mm outer diameter. Please do not remove the prote...

Black Long Front Brake & Clutch Lever Set

Brass Solderless Brake & Clutch Cable Nipples (50 Pieces)

Clutch, choke & brake cable screw and fit type nipples without the need of solder. Also known as pear or top hat type nipples. Dimension...

Purple Bar End Weights

Fits all steel 7/8" handlebars. Designed to protect your handlebars and grips in the event of a spill. Easy installation! screw directl...

Throttle Sleeve Twist Honda 53140-KSE-000 53140-KSE-305

Please Note: This throttle sleeve does not include the grip, it comes as shown in the image. Replacement aftermarket part for Honda OEM 5314...

Red Handlebar Cable Adjuster for 8mm Cable

Can be used as clutch and front brake cable adjuster. Aluminium. Takes an 6mm OD cable end. Knurled and slotted nut for adjustment. Thread l...

Gear Lever Rubbers 24781-371-000 92161-2392 92075-1585 (5 Pcs)

Oval fitting open slot ends. Slot ID Length: 18.5mm. Slot ID Depth: 9mm. Replacement aftermarket part for the following OEM numbers: Honda 2...

Kickstart Shaft, Springs & Pinion (Longer Version)

1" Handlebar Throttle Unit for British Bikes

Complete alloy throttle unit.

Red 7/8" Scott Type ATV Handlebar Grips

Both grips are 7/8" inner diameter.

Black 7/8" Aluminium Drag Straights Handlebars

Overall width: 29.5". Please do not remove the protective sock from your new handlebars until you are 100% certain that they are suitab...

Foam 1" Handlebar Grips

Length is the total length of each grip. Length 130mm. Fit 1" handlebars. Open ends for your bar ends or weights.

Honda 46500-KB4-000 Rear Brake Foot Pedal

Replacemet for Honda OE 46500-KB4-000. 16mm bore size. 300mm between bore and toe plate centres.

135mm Leather 1" Handlebar Grips with Chrome Ends

Length is the total length of each grip. Length 135mm. Fit 1" handlebars.

Black Short Front Brake & Clutch Lever Set

Throttle Sleeve Twist Yamaha 22W-26243-00 322-26243-00

Replacement aftermarket part for Yamaha OEM 22W-26243-00, 322-26243-00. This will suit the following models as well as those listed in fitme...

Ex-Up Power Valve Cables YZF-R1 1998-01 4XV-1130E-00 4XV-1130E-01

Exhaust valve cable assembly pulley set. Replacement aftermarket part for the following OEM numbers: Yamaha 4XV-1130E-00-00, 4XV-1130E-01-00...

7/8" Bar End Type Heated Handlebar Grips

Length is the total length of each grip. High, low and off settings. Fit 7/8" handlebars.

8mm Cable Ferrules for Brake Cable SKU 013454 SKU 013455

Suitable for 8.00mm OD outer brake cable. Outer diameter 7.5mm. Inner diameter 7.2mm. Length 14.50mm.

Black Diamond Cut Style Handlebar End Caps Aluminium Bars 13mm

Fits aluminium 7/8" handlebars with a 13mm inner. Designed to protect your handlebars and grips in the event of a spill. Easy installat...

6mm x 6.5mm Barrel Type Cable Nipples

Outer diameter 6mm. Length 6.5mm.

Purple 7/8" Engraved Aluminium Handlebar Grips with Chrome End Caps

Length is the total length of each grip. Length 135mm. Fit 7/8" handlebars.

Alloy 7/8" Aluminium 2.5" Rise Handlebars with Brace

Anodised alloy aluminium. Overall width: 31". Rise: from top to top of bar 2.5". Centre width: 7.5". Please do not remove the...

Tacho Cable - 016007

Length: 32.5" (825mm). Clock fit: screw over 11mm. Tacho drive end: screw over 15mm. Inner type: square/square.

Black 7/8" x 130mm ATV Handlebar Grips

Length is the total length of each grip. Length: 130mm. Both grips are 7/8" inner diameter.

1.50mm x 50 Metre Throttle Cable Inner

Length 50 metres.

Suzuki Throttle Sleeve Twist for Single Pull Throttle Cables

Length 130mm. For 7/8" handlebars. Suitable for Suzuki road bikes up to 200cc.