This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
Brake light switch with 820mm lead length. Replacement aftermarket part for the following OEM numbers: Suzuki 57460-49100, 57460-45500, 5746...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Brake light switch with lead. 2 wires with bullet connectors.
For use with bulbs up to 10 watt.
Steel sprocket. Replaces JT Sprockets JTF425-16.
Steel sprocket. Replaces JT Sprockets JTF425-14.
Steel sprocket. Replaces JT Sprockets JTF425-15.
Top 1 outer length: 650mm. Outer top 1 fitting: 45' bend, 5mm adjuster. Outer bottom 1 fitting: standard ferrule. Outer bottom 2 fitting: st...
Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR802.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 37. JT Part Number: JTR802.37. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF425.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF425.17. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. 0.6mm fine...
Outer diameter 100mm. Thickness 1.6mm. Number of pegs 26.
Outer diameter (including teeth) 111mm. Thickness 3mm. Number of pegs 12. Replacement for Vesrah VP3021.
Thread 14mm x hex 13/16" x pitch 1.25mm. Projected insulator. Heat range 6. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre...
Outer diameter 40mm. Inner diameter 25mm. Width 8mm.
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
Outer diameter 110mm. Replacement aftermarket part for Suzuki OEM 64651-01001.
Outer diameter 44mm. Inner diameter 34.5mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylin...
