Early Honda style. Right-handed 8mm clockwise thread. Glass outer diameter 98mm. Total outer diameter 110mm. Stem length 130mm. 52mm from be...
Outer length: 985mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm adjuster. Additional fittings info: adjuster is loose. I...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Steel sprocket. Replaces JT Sprockets JTR810-41.
Steel sprocket. Replaces JT Sprockets JTR810-39.
Steel sprocket. Replaces JT Sprockets JTR810-36.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
For use with bulbs up to 10 watt.
Steel sprocket. Replaces JT Sprockets JTF425-14.
Steel sprocket. Replaces JT Sprockets JTF425-16.
Steel sprocket. Replaces JT Sprockets JTF425-15.
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 7. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF425.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR810.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF425.17. Type: Standard. Material: Steel. Fitment: Direct replaceme...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).
Replacement aftermarket part for the following OEM numbers: Honda 42711-GK4-605, 44711-GB6-882, 42711-GK4-603, 42711-GK4-604, 42711-GK4-602,...
Outer diameter 43mm. Inner diameter 33mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
