Outer diameter 40mm. Inner diameter 17mm. Width 7mm.
Stem length: 39mm. Long stem SKU: 018919. Fits front or rear on either left or right hand side. Thread: 10mm. Replacement lens SKU: 018511. ...
Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
Steel sprocket. Replaces JT Sprockets JTR801-37.
Steel sprocket. Replaces JT Sprockets JTF563-14.
Steel sprocket. Sprocket retainer - SKU: 002934 and sprocket nuts - SKU: 002904 may be required.
Steel sprocket. Replaces JT Sprockets JTF563-13.
Steel sprocket. Replaces JT Sprockets JTF563-15.
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
For use with bulbs up to 10 watt.
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF563.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF563.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF563.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR801.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Brand: JT Sprockets. Position: Rear. Tooth Count: 37. JT Part Number: JTR801.37. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR801.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 32. JT Part Number: JTR801.32. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 4. 12.7mm (1/2") reach. Standard 2...
Outer diameter 47mm. Inner diameter 23mm. Width 8mm.
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 43.00mm. Gudgeon pi...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 42.00mm. Gudgeon pi...
Koyo 6201DDU. Double sided rubber sealed. Outer diameter 32mm. Inner diameter 12mm. Width 10mm. Made in Japan. Replacement aftermarket part ...