Koyo 6300DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 10mm. Width 11mm. Made in Japan.
Piston outer diameter 25.5mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 100 pistons. Fit Japanese bikes o...
Straight TR4 valve. Same as 90/80-R17. Replacement aftermarket part for the following OEM numbers: Honda 42712-GS4-006, 42712-041-154, 42712...
Outer diameter 24mm. Inner diameter 14mm. Width 6mm.
Brand cross reference: Vesrah VD250; 165, 215; Ferodo FDB631; SBS 638. You may need more than a single pair of pads if you have twin discs. ...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
Piston outer diameter 25.5mm. Piston length 31mm. This kit includes a single piston with matching internal oil seal and outer dust seal. Sui...
Straight TR4 valve.
Brand cross reference: Vesrah VD250; 165, 215, 197; Ferodo FDB631; SBS 638. You may need more than a single pair of pads if you have twin di...
316L stainless steel. Piston outer diameter 25.5mm. Piston length 31mm. This kit includes a single piston with matching internal oil seal an...
Koyo 6205-C3. Outer diameter 52mm. Inner diameter 25mm. Width 15mm. Made in Japan.
Koyo 6205-C4. Outer diameter 52mm. Inner diameter 25mm. Width 15mm. Made in Japan.
Comes with amber and clear lenses and bulbs. Robust, lightweight, and weather resistant. Complete with bulbs and wiring.
Outer diameter 40mm. Inner diameter 25mm. Width 6mm.
Everything you need is included in this easy to fit buzzer kit. Simply connect the red wire to the indicator positive one side and the black...
Note: The original relay for many of the Suzuki models (OEM #38610-45031) have the terminals pointing down but this one has the terminals or...
For use on 12v bulbs upto 23w.
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
Replacement front sprocket oil seal, fitted around the gearbox output shaft behind the front sprocket. This seal helps prevent engine or tra...
