Suzuki GP100 (Front Disc) 1978 Parts

Clutch Cable Suzuki 58200-39300 58200-39100 58200-36201

Outer cable length: 960mm. Outer cable top fitting: standard ferrule. Outer cable bottom fitting: 8mm adjuster. Additional fittings info: ad...

MTX 428HD-118 Gold Heavy Duty Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...

Clutch Metal Plate 21451-19A00 21451-41700 13089-S001

Outer diameter 115mm. Thickness 1.5mm. Number of pegs 30. Replacement aftermarket part for the following OEM numbers: Kawasaki 13089-S001. S...

Chrome 55mm Indicator with Amber Lens - 018911

Stem length 55mm. Thread 6mm. Robust, lightweight, and weather resistant. Complete with bulbs and wiring.

NGK LB05F 8051 Black 90° 5kΩ Resistor Spark Plug Cap

Genuine NGK LB05F black resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...

Black 39mm Indicator with Amber Lens

Stem length 39mm. Thread 6mm. Robust, lightweight, and weather resistant. Complete with bulbs and wiring.

Speedo Cable Suzuki 34910-26501 34910-39142 (820mm)

Please ensure this 32" cable is long enough for your Suzuki as you may require longer as listed below. Length: 32" (820mm). Clock ...

44mm x 25mm x 7mm Crank Oil Seal

Outer diameter 44mm. Inner diameter 25mm. Width 7mm. Replacement aftermarket part for the following OEM numbers: Suzuki 09283-25066. and man...

40mm x 25mm x 7mm Front Sprocket Oil Seal

Outer diameter 40mm. Inner diameter 25mm. Width 7mm.

DID 428HD-118L Heavy Duty Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

RK 428-120L HSB Heavy Duty Gold Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...

DID 428HD-118L Gold Heavy Duty Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

DID 428NZ-118L Gold Heavy Duty Pro-MX Drive Chain

Great for mini and vintage bikes, the 428NZ is a great non-sealed option that will give you greater performance than the OEM non-sealed chai...

RK Pro-MX 428-120L MXZ Heavy Duty Gold Drive Chain

Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...

TVH 428-120 Gold X-Ring Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...

Brake Lever Suzuki 57420-45010 57300-11320

Alloy brake lever. Replacement aftermarket part for Suzuki OEM 57300-11320, 57420-11300, 57420-11320, 57420-11322, 57420-45010.

MTX 428HD-120 Gold Heavy Duty Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...

Alloy Brake Lever with Rubber Tip - 014486

34 Tooth Rear Sprocket JTR802-34

Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...

Brake Light Switch Suzuki 57460-49100 57460-45500 57460-49300

Brake light switch with 820mm lead length. Replacement aftermarket part for the following OEM numbers: Suzuki 57460-49100, 57460-45500, 5746...

6v AC Ignition Coil Single Output + 1 Wire (55mm)

Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...

NGK BR8HIX Iridium Spark Plug (Japan)

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...

Brake Light Switch for Early Suzuki & Yamaha Models

Brake light switch with lead. 2 wires with bullet connectors.

Hendler 6v AC Ignition Coil Single Output (55mm)

Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...

6v 2-Pin 10 Watt Indicator Relay

For use with bulbs up to 10 watt.

16 Tooth Front Sprocket - 003478

Steel sprocket. Replaces JT Sprockets JTF425-16.

14 Tooth Front Sprocket - 003216

Steel sprocket. Replaces JT Sprockets JTF425-14.

15 Tooth Front Sprocket - 003353

Steel sprocket. Replaces JT Sprockets JTF425-15.

JT Sprockets 37 Tooth Rear Sprocket JTR802.37

Brand: JT Sprockets. Position: Rear. Tooth Count: 37. JT Part Number: JTR802.37. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 34 Tooth Rear Sprocket JTR802.34

Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR802.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...