Steel sprocket. Replaces JT Sprockets JTR818-41.
This kit includes only the items shown in the image. This may or may not be enough for your vehicle depending on its model. Please check bef...
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating. Earth wire l...
Non-resistor type. Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 8. Reach 19mm (3/4"). Standard 2.5mm copper core centre ele...
Steel sprocket. Replaces JT Sprockets JTR818-42.
Note: 90mm centre to centre of mounting holes version. Some models use a block connector although this coil is an ideal replacement for the ...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF518.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF518.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR818.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 42. JT Part Number: JTR818.42. Type: Standard. Material: Steel. Fitment: Direct replacemen...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
This repair kit includes the following parts: 3 x roller 15mm x 13mm. 3 x cap 6.2mm x 15.5mm. 3 x spring. Made in Japan. Replacement afterma...
Length: 26mm. Width: 13mm. Thickness: 6.5mm.
Outer diameter 40mm. Inner diameter 25.5mm. Thickness 5mm.
Outer diameter 40mm. Inner diameter 25.5mm. Thickness 4mm.
With Staggered Pins.
If these bulbs are showing out of stock you could always use SKU: 018217 which includes one amber and one clear 12V 23W BA15s bulb or use SK...
Made in Japan.
Straight TR4 valve.
NTN 6204LLU. Double sided rubber sealed. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan.
Includes all the parts you need. OEM replacement, meets or exceeds OEM specs. Replacement aftermarket part for the following OEM numbers: Ya...
42mm is the outside diameter of your carburettor intake. Overall length including rubber 53mm.
Outer diameter 46mm. Inner diameter 37mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Outer diameter: 275mm. Inner diameter: 56mm. Number of bolt holes: 6. Bolt holes OD: 8mm . Holes are non-countersunk. PCD (Pitch Circle Diam...
Replacement aftermarket part for for the following OEM numbers: Suzuki 37400-45012, 37400-45011, 37400-45013, 37400-45602, 37400-45603. and ...
Replacement aftermarket part for the following OEM numbers: Honda 45511-371-003, 43513-MJ6-006, 43513-461-771, 43513-422-671, 43513-443-761,...
