Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs.
Steel sprocket. ID including splines: 21.7mm. OD without splines: 25mm. Width: 9mm. Bolt hole centres: 42mm. Chain pitch: 530mm. Replaces JT...
Kit contains a pair of fork oil seals.
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Black centre. Outer diameter 240mm. Inner diameter 89mm. 5 bolt holes. 10mm bolt holes. Countersunk.
All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that k...
Piston outer diameter 38mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. Rep...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 20mm. Thickness 2mm. Made in Japa...
Height 68mm. Width 72mm. Thread 20mm. Pitch 1.00mm. Replacement for Hiflofiltro HF138, Champion K301. This filter does not come with an O-ri...
Upper bearing: 25mm x 47mm x 15mm. Lower bearing: 30mm x 55mm x 17mm . Includes all bearings and seals. Heavy duty tapered roller bearings. ...
Gold centre. Outer diameter 240mm. Inner diameter 89mm. 5 bolt holes. 10mm bolt holes. Countersunk.
Outer diameter 310mm. Inner diameter 64mm. 5 bolt holes. PCD (Pitch Circle Diameter): 85mm. 10mm bolt holes. Holes are non-countersunk. Flat...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
Comes with rivet link, no split link but these can be found under split links via search. The D.I.D ZVM-X Series utilizes our patented X-Rin...
Outer diameter 41mm. Inner diameter 32mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Piston OD: 15.72mm. Piston Length: 41.5mm. Made in Japan. Replacement aftermarket part for for the following OEM numbers: Suzuki 59600-45860...
Made in Japan. This set includes the following items: 2 x shaft OD 25mm x ID 20mm x L 35mm. 2 x bearing OD 33mm x ID 25mm x W 30mm.
Steel sprocket. ID: 76mm. PCD (Pitch Circle Diameter): 100mm. Width: 9mm. Bolt hole ID: 10.3mm. Number of bolt holes: 6. Pitch: 530. Replace...
Replacement aftermarket part for the following OEM numbers: Suzuki 13780-17E00. This will suit the following models as well as those listed ...
Please Note: HT lead for V-Twins on rear cylinder like the GV700 will require longer lead use SKU: 023734 which is one metre of 7mm. 12v ign...
2 spade connectors. Does not come with spring. Replacement aftermarket part for the following OEM numbers: Honda 35350-166-003, 35350-166-00...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF513.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Electronic voltage alternator regulator. Mounts in front of the generator on left hand side of the engine. Made in Japan. Replacement afterm...
12 volt 10AH 180 CCA. Length: 150mm x Width: 88mm x Height: 130mm. If your battery space can take at least another 15mm in height (145mm) yo...
Steel sprocket. Replaces JT Sprockets JTR827-50.
Steel sprocket. Replaces JT Sprockets JTF440-15.
Steel sprocket. Replaces JT Sprockets JTR827-42.
