Kit contains a pair of fork dust seals.
NTN 6204LLU. Double sided rubber sealed. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan.
Koyo 32005X. Inner diameter 25mm. Outer diameter 47mm. Width 15mm. Made in Japan. Bearing seal SKU: 013248. Replacement aftermarket part for...
Replacement aftermarket part for the following OEM numbers: Kawasaki 46092-1159, 46092-0555. Suzuki 57620-19C01, 57620-27A30, 57620-27A31.
Outer diameter 22mm. Inner diameter 14mm. Width 5mm.
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. This kit contains an inner oil seal...
Kit contains a pair of fork oil seals.
Piston outer diameter 30mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Note: The original relay for many of the Suzuki models (OEM #38610-45031) have the terminals pointing down but this one has the terminals or...
Upper bearing: 25mm x 47mm x 15mm. Lower bearing: 30mm x 55mm x 17mm . Includes all bearings and seals. Heavy duty tapered roller bearings. ...
All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that k...
Piston outer diameter 38mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. Rep...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 20mm. Thickness 2mm. Made in Japa...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
Outer diameter 38mm. Inner diameter 28.5mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylin...
Height 68mm. Width 72mm. Thread 20mm. Pitch 1.00mm. Replacement for Hiflofiltro HF138, Champion K301. This filter does not come with an O-ri...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Piston outer diameter 34mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Made in Japan. Fit Japan...
Piston OD: 15.72mm. Piston Length: 41.5mm. Made in Japan. Replacement aftermarket part for for the following OEM numbers: Suzuki 59600-45860...
For use on 12v bulbs upto 23w.
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Fits NGK D series plugs with threaded terminals. Straight type. 10-12mm. 5 kilo ohm. Length 77mm. Terminal stud. Water resistant, vibration ...
12 volt 8AH 120 CCA. Length: 150mm x Width: 88mm x Height: 105mm. Replaces: 0092M60100, 0092M60150, 508012008, 508012008A514, 510901012, 6E9...
Steel sprocket. Replaces JT Sprockets JTF433-13.
Outer diameter (including teeth) 127mm. Inner diameter 103mm. Thickness 3mm. Number of pegs 12. Replacement for Vesrah VP3035.
Top 1 outer length: 730mm. Outer top 1 fitting: 90' bend, 7mm push in, special locking plate. Outer bottom 1 fitting: 6mm adjuster. Top 1 in...
