Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made...
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Voltage: 12v. Wattage: 1.7w. Base width: 5mm. Width of glass: 6.5mm. Maximum length: 21.8mm. Uses of Medium T6.5 Capless Wedge Bulbs. Medium...
Smallest of the two mechanical water pump seals fitted in mainly Suzuki models. Outer diameter 24mm/29mm. Inner diameter 11.15mm/22.5mm. Wid...
This will suit the following models as well as those listed in fitments: BMW R nineT 2013-16 (Front). Indian FTR 1200 2021-24 (Front). India...
Outer diameter 22mm. Inner diameter 14mm. Width 5mm.
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. This kit contains an inner oil seal...
Piston outer diameter 30mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Piston outer diameter 38mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. Rep...
Made in Japan. This set includes the following items: 2 x shaft OD 25mm x ID 20mm x L 40mm. 2 x bearing 30mm x 40mm x 25mm. Replacement afte...
Upper or Lower depending on whether standard or USD forks. Outer diameter 47mm. Inner diameter 43mm. Width 15mm. Thickness 2mm.
108mm ID. 125mm OD without pegs. 136mm OD with pegs. 14mm width of peg. Number of pegs 10. 3.0mm thickness. Replacement for Vesrah VP1034. R...
Outer diameter 220mm. Inner diameter 89mm. 5 bolt holes. 10mm bolt holes. Non-countersunk.
Height 68mm. Width 72mm. Thread 20mm. Pitch 1.00mm. Replacement for Hiflofiltro HF138, Champion K301. This filter does not come with an O-ri...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 30mm x OD 55mm x Thickness 17mm. Bearing 2: ID 30mm x OD 55mm x Thick...
This kit includes the following bearings: Bearing 1: ID 30mm x OD 55mm x Thickness 17mm. Bearing 2: ID 30mm x OD 55mm x Thickness 17mm.
Piston outer diameter 34mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Made in Japan. Fit Japan...
Endless cam chain. Length: 126 links. Pitch: 6.35mm. Width between guides: 7.15mm. Overall width: 10.3mm. Made in Japan. Fitting Endless Cam...
Alloy Version. Black version of same lever use our SKU: 015102 . Replacement aftermarket part for the following OEM numbers: Aprilia AP82180...
Outer diameter 41mm. Inner diameter 32mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
Outer diameter 19.50mm. Length 54.50mm. Thickness 2.60mm. Heavy duty clutch springs.
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Thickness: 2mm. Number of pegs: 25. Width of pegs: 5.5mm. Outer diameter: 125mm. Inner diameter without teeth: 100mm. Inner diameter includi...
Outer diameter 70mm. Inner diameter 36mm. Width 6mm.
