Replacement aftermarket part for Suzuki OEM 57420-29400.
Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
This wheel bearing kit uses premium quality Japanese Koyo bearings.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Note: The compact diameter of 11T and 12T sprockets does not allow for bolt hole machining. Please use an appropriate circlip for secure ins...
Outer diameter 40mm. Inner diameter 25mm. Width 7mm.
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
These steering head tapered bearing kits are provided by Hendler to the same specification as the All Balls kits. While the quality is compa...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF1263.17. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF1263.12. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF1263.13. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF1263.16. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF1263.14. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF1263.15. Type: Standard. Material: Steel. Fitment: Direct replacem...
Outer diameter 52mm. Inner diameter 26mm. Width 7mm.
Terminal position guide: terminal positions are described like a clock face when looking directly at the terminal end of the coil as shown i...
Steel sprocket. ID 64mm. PCD (Pitch Circle Diameter) 84mm. Mounting holes OD 8.30mm. Number of mounting holes 6. Width 7.10mm. Tooth pitch 4...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 9. Reach 19mm (3/4"). Fine wire nickel alloy centre electrode. 0.7-0.8mm gap. ...
Brand: JT Sprockets. Position: Rear. Tooth Count: 50. JT Part Number: JTR809.50. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 51. JT Part Number: JTR809.51. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 53. JT Part Number: JTR809.53. Type: Standard. Material: Steel. Fitment: Direct replacemen...
