Outer length: 1005mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm adjuster. Additional fittings info: adjuster is loose. ...
This wheel bearing kit uses premium quality Japanese Koyo bearings.
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Outer diameter 40mm. Inner diameter 25mm. Width 7mm.
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. Giving yo...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
These steering head tapered bearing kits are provided by Hendler to the same specification as the All Balls kits. While the quality is compa...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
Terminal position guide: terminal positions are described like a clock face when looking directly at the terminal end of the coil as shown i...
Steel sprocket. ID 64mm. PCD (Pitch Circle Diameter) 84mm. Mounting holes OD 8.30mm. Number of mounting holes 6. Width 7.10mm. Tooth pitch 4...
Steel sprocket. Replaces JT Sprockets JTF426-16.
Steel sprocket. Replaces JT Sprockets JTF426-15.
Steel sprocket. Replaces JT Sprockets JTF426-14.
Steel sprocket. Replaces JT Sprockets JTF426-13.
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 9. Reach 19mm (3/4"). Fine wire nickel alloy centre electrode. 0.7-0.8mm gap. ...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF426.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF426.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Rear. Tooth Count: 50. JT Part Number: JTR809.50. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 51. JT Part Number: JTR809.51. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 53. JT Part Number: JTR809.53. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Outer diameter 56mm. Inner diameter 30mm. Width 6mm.
Flat head countersunk bolts. Thread 8mm. Length 28mm. Pitch 1.25mm.
Thread 8mm. Spanner size 12mm.
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Fits NGK B series plugs with threaded terminals. 90 degree elbow. 14mm. 5 kilo ohm. Terminal stud. Replacement aftermarket part for the foll...
