Outer diameter: 138mm. Outer diameter: including teeth 152mm. Inner diameter 116mm. Thickness: 3.1mm. Number of pegs: 12. Width of pegs: 16m...
These steering head tapered bearing kits are provided by Hendler to the same specification as the All Balls kits. While the quality is compa...
Thickness: 1.6mm. Number of pegs: 36. Width of pegs: 5.5mm. Outer diameter: 125mm. Inner diameter without teeth: 115mm. Inner diameter inclu...
Outer diameter 47mm. Inner diameter 30mm. Width 5mm.
Performance Upgrade: Replaces worn, damaged parts with, in many cases, upgraded materials like high-performance interface gasket material fo...
Thread 12mm x hex 18mm x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre electrode. 0.7...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Brake light switch with 820mm lead length. Replacement aftermarket part for the following OEM numbers: Suzuki 57460-49100, 57460-45500, 5746...
Fits NGK D series plugs with threaded terminals. 102 degree elbow. 10-12mm. 5 kilo ohm. 70mm from end to elbow. Terminal stud. Replacement a...
Brake light switch with lead. 2 wires with bullet connectors.
For use with bulbs up to 10 watt.
Steel sprocket. Replaces JT Sprockets JTF434-15.
Steel sprocket. Replaces JT Sprockets JTF434-16.
NGK DR8ES-L (2923). Thread Diameter: 12mm (M12). Thread Pitch: 1.25mm. Seat Type: Gasket. Reach:19mm. Hex Size: 18mm. Terminal Type: Thread ...
Endless cam chain. Length: 98 links. Pitch: 7.77mm. Roller width: 5mm. Overall width: 12mm. Made in Japan. Fitting Endless Cam Chains – Im...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF434.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF434.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF434.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Rear. Tooth Count: 42. JT Part Number: JTR820.42. Type: Standard. Material: Steel. Fitment: Direct replacemen...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
Koyo 6201DDU. Double sided rubber sealed. Outer diameter 32mm. Inner diameter 12mm. Width 10mm. Made in Japan. Replacement aftermarket part ...
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 520VX...
Outer diameter 46mm. Inner diameter 37mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Complete rear light unit with bracket as shown. Replacement aftermarket part for Suzuki OEM 35720-38350, 35720-38310-999, 35720-38311-999. 3...
