This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made...
If these bulbs are showing out of stock you could always use SKU: 018217 which includes one amber and one clear 12V 23W BA15s bulb or use SK...
Voltage: 12v. Wattage: 1.7w. Base width: 5mm. Width of glass: 6.5mm. Maximum length: 21.8mm. Uses of Medium T6.5 Capless Wedge Bulbs. Medium...
Smallest of the two mechanical water pump seals fitted in mainly Suzuki models. Outer diameter 24mm/29mm. Inner diameter 11.15mm/22.5mm. Wid...
Upper or Lower depending on whether standard or USD forks. Outer diameter: 43.6mm. Inner diameter: 41.7mm. Width: 20mm. Thickness 0.95mm. Th...
Piston outer diameter 27mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. Rep...
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Made in Japan. Fit Japan...
Includes all the parts you need. OEM replacement, meets or exceeds OEM specs. Replacement aftermarket part for the following OEM numbers: Ya...
Replacement aftermarket part for Kawasaki OEM 92024-044
Upper or Lower depending on whether standard or USD forks. Outer diameter: 47mm. Inner diameter: 43.10mm. Width: 12mm. Thickness: 1.95mm. Re...
This will suit the following models as well as those listed in fitments: BMW R nineT 2013-16 (Front). Indian FTR 1200 2021-24 (Front). India...
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs.
Outer diameter 22mm. Inner diameter 14mm. Width 5mm.
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. This kit contains an inner oil seal...
Piston outer diameter 30mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Steel sprocket. ID including splines: 21.7mm. OD without splines: 25mm. Width: 9mm. Bolt hole centres: 42mm. Chain pitch: 530mm. Replaces JT...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Piston outer diameter 38mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. Rep...
Dyno tested to 500,000 strokes with less wear than OEM bushings. Includes bushings, copper washers, o-rings and fork seal snap rings.
Made in Japan. This set includes the following items: 2 x shaft OD 25mm x ID 20mm x L 40mm. 2 x bearing 30mm x 40mm x 25mm. Replacement afte...
108mm ID. 125mm OD without pegs. 136mm OD with pegs. 14mm width of peg. Number of pegs 10. 3.0mm thickness. Replacement for Vesrah VP1034. R...
Outer diameter 220mm. Inner diameter 89mm. 5 bolt holes. 10mm bolt holes. Non-countersunk.
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Height 68mm. Width 72mm. Thread 20mm. Pitch 1.00mm. Replacement for Hiflofiltro HF138, Champion K301. This filter does not come with an O-ri...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 30mm x OD 55mm x Thickness 17mm. Bearing 2: ID 30mm x OD 55mm x Thick...
This kit includes the following bearings: Bearing 1: ID 30mm x OD 55mm x Thickness 17mm. Bearing 2: ID 30mm x OD 55mm x Thickness 17mm.
Alloy Version. Black version of same lever use our SKU: 015102 . Replacement aftermarket part for the following OEM numbers: Aprilia AP82180...
Made in Japan.
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
