Suzuki TS100 ER 1979 Parts

Alloy Clutch Lever with Rubber Tip

62mm x 25mm x 17mm Crank Bearing Koyo 6305 C3

Koyo 6305 C3. Outer diameter 62mm. Inner diameter 25mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...

46mm x 38mm x 5mm Alloy Fibre Exhaust Gasket

Non-asbestos. Outer diameter 46mm. Inner diameter 38mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...

Chrome Round Mirrors 8mm/10mm 56500-28601 56500-08010 56500-45640 56500-22011

These mirrors will fit any bike with an 8mm or 10mm right hand thread (clockwise) each side, left or right. Stem length: 190mm centre to cen...

Tacho Cable Suzuki 34940-01A00 34940-03D01 34940-30901 (34")

Please Note: This cable is 34" (860mm) so check yours before ordering. Length: 34" (860mm). Longer length use our 41" (1040mm...

Clutch Friction Plate 21441-13A01 13088-S001 21441-28301

Outer diameter: 115mm. Outer diameter (including teeth): 127mm. Inner Diameter: 96mm. Thickness: 3mm. Number of pegs: 12. Replacement afterm...

30mm x 42mm x 10.5mm Fork Oil Seals 93110-30013-00 51153-48420

Inner diameter: 30mm. Outer diameter: 42mm. Thickness: 10.5mm. Replacement aftermarket part for the following OEM numbers: Suzuki 51153-4842...

275/300-19 Inner Tube with TR4 Valve

Straight TR4 valve.

Tacho Cable Suzuki 34940-30031 34940-29903 34940-29901 (41")

Please Note: This cable is 41" (1040mm) so check yours before ordering. Length: 41" (1040mm). Shorter length use our 34" (860...

Chrome Round Mirrors with 10mm Thread - 011957

Glass outer diameter 110mm. 190mm stem length from centre of mirror to bend. 50mm from bend to end of thread. E-marked. Replacement aftermar...

8mm x 30mm Rear Sprocket Hexagon Bolts

Thread 8mm. Length 30mm. Pitch 1.25mm. Spanner size 12mm.

Kickstart Lever Suzuki 26300-39300

Straight length 150mm. Replacement aftermarket part for Suzuki OEM 26300-39300, 26300-39100, 26300-39101

22mm x 12mm x 9mm Clutch Arm Rod Oil Seal

Outer diameter 22mm. Inner diameter 12mm. Width 9mm.

51mm Non-Locking Fuel Cap

Outer diameter of the cap body that sits over the tank filler neck: 51mm. Screw-on fine thread.

17 Tooth Front Sprocket JTF1263-17

Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...

Brake Cable Suzuki 58110-48500 58110-29300

Outer cable: 1215mm. Inner cable: 1280mm to the nipple. Inner cable 1310mm to the clevis hole centre. Replacement aftermarket part for Suzuk...

Hendler 25-1167 Wheel Bearing Kit (Koyo Bearings)

This wheel bearing kit uses premium quality Japanese Koyo bearings.

30mm x 16mm x 8mm Kickstart Oil Seal

Outer diameter 30mm. Inner diameter 16mm. Width 8mm.

TourMax FPC-303 Fuel Tap Suzuki 44300-22077 44300-22076

Made in Japan. Replacement aftermarket part for Suzuki OEM 44300-22076, 44300-22077, 44300-22073, 44300-22074, 44300-22075.

Amber Indicator Lens Suzuki 35612-01A70 35612-48530

Replacement aftermarket part for Suzuki OEM 35612-48530, 35612-01A70.

Indicator with Amber Lens Suzuki 35603-48521 35603-48532 35601-48522

Stem length: 40mm. Thread: 12mm. Robust, lightweight, and weather resistant. Complete with bulbs and wiring. Replacement aftermarket part fo...

NGK BR8EIX Iridium Spark Plug (Japan)

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...

Clutch Metal Plate 21451-19A00 21451-41700 13089-S001

Outer diameter 115mm. Thickness 1.5mm. Number of pegs 30. Replacement aftermarket part for the following OEM numbers: Kawasaki 13089-S001. S...

NGK LB05F 8051 Black 90° 5kΩ Resistor Spark Plug Cap

Genuine NGK LB05F black resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...

44mm x 25mm x 7mm Crank Oil Seal

Outer diameter 44mm. Inner diameter 25mm. Width 7mm. Replacement aftermarket part for the following OEM numbers: Suzuki 09283-25066. and man...

15 Tooth Front Sprocket JTF1263-15

Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...

12 Tooth Front Sprocket JTF1263-12

Note: The compact diameter of 11T and 12T sprockets does not allow for bolt hole machining. Please use an appropriate circlip for secure ins...

Clutch Cable - 013876

Outer length: 1005mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm adjuster. Additional fittings info: adjuster is loose. ...

Hendler 25-1197 Wheel Bearing Kit (Koyo Bearings)

This wheel bearing kit uses premium quality Japanese Koyo bearings.

16 Tooth Front Sprocket JTF1263-16

Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...