These steering head tapered bearing kits are provided by Hendler to the same specification as the All Balls kits. While the quality is compa...
Replacement aftermarket part for Yamaha OEM 137-83912-02-38, 137-82912-02-00, 137-83912-00-00, 137839-12-01-00, 137839-12-01-38, 137839-12-0...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
Note: The compact diameter of 11T and 12T sprockets does not allow for bolt hole machining. Please use an appropriate circlip for secure ins...
Replacement aftermarket part for Yamaha OEM 2N3-83922-00, 137-83922-00, 137-83922-01-00, 137-83922-02-00, 137-83922-02-38, 232-83922-30-00, ...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Outer diameter 40mm. Inner diameter 20mm. Width 8mm.
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF1263.17. Type: Standard. Material: Steel. Fitment: Direct replacem...
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF1263.14. Type: Standard. Material: Steel. Fitment: Direct replacem...
Steel sprocket. Replaces JT Sprockets JTR838-39.
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF1263.16. Type: Standard. Material: Steel. Fitment: Direct replacem...
Steel sprocket. Replaces JT Sprockets JTR838-45.
Bend the steel wire to suit or use your original if need be and hook to the switch. Brake light switch with lead. 2 wires with bullet connec...
Brake light switch with lead. Small push-in type. 2 wires with bullet connectors.
Non-resistor type. Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 8. Reach 19mm (3/4"). Standard 2.5mm copper core centre ele...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Outer diameter 122mm. Thickness 1.1mm. Number of pegs 20.
Outer diameter (including teeth) 134mm. Thickness 3mm. Number of pegs 10. Replacement for Vesrah VP2007/2.
Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR838.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...
4 wires with female bullet block connector. 2 keys included.
Note: The Fizzy FS1/FS1E used different condensers throughout models, so please check the image as you may need our SKU: 005012 with a singl...
