Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF436.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF565.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF436.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Bend the steel wire to suit or use your original if need be and hook to the switch. Brake light switch with lead. 2 wires with bullet connec...
For use with bulbs up to 23 watt. L = turn switch, X = positive, P = dash light.
Non-resistor type. Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 8. Reach 19mm (3/4"). Standard 2.5mm copper core centre ele...
Brake light switch with lead. Small push-in type. 2 wires with bullet connectors.
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thickness 12mm.
Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.
Replacement aftermarket part for following OEM numbers: - Please Note: This is just for the needle valve as per image and does not include t...
Needle bearings: 22mm x 28mm x 16mm. TourMax: SNT-205. Made in Japan. Replacement aftermarket part for the following OEM numbers: Kawasaki 3...
RK is the leading manufacturer of OEM motorcycle drive chain to all major Japanese manufactures. With over 40 years of supply to the largest...
Please note: for models that have 14mm pins you will need to add 14mm bushes to your cart SKU: 019917. Suitable for early Japanese motorcycl...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. RK XSO Series: Designed for Basic Motorcy...
Inner diameter 30mm. Outer diameter 48mm. Width 12mm.
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 520VX...
Fits fork tube diameter: 34mm. Push-over internal diameter: 46mm. Overall length: 39.5mm. Type: Push over fork dust seal. Replacement afterm...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thick...
34mm mounting centres. Made in Japan. Replacement aftermarket part for for the following OEM numbers: Yamaha 498-24500-01-00, 438-24500-00-0...
48mm is the outside diameter of your carburettor intake. Overall length including rubber 58mm. Lower width maximum OD 83mm.
Length: 815mm (32"). Clock fit: screw over 11mm. Tacho drive end: screw in 15mm. Inner type: square/square. Note: This rev-counter cabl...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 34mm x OD 46mm x Thickness 10.5mm. Push-over type fork d...
Includes all bearings and seals. Heavy duty tapered roller bearings. Direct replacement for OEM bearings. Upgrade replacement for ball style...
Steel sprocket. Splines: 13. ID including splines: 21.7mm. ID without splines: 25mm. Bolt hole centres: 41.5mm. Number of mounting holes: 2....
