Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 9. Reach 19mm (3/4"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm g...
Thread 8mm. Length 35mm. Pitch 1.25mm.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thickness 12mm.
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
Outer cable 1200mm. Overhang 100mm. Replacement aftermarket part for Yamaha OEM 1M1-26341-00, 498-26341-00, 498-26341-01, 15A-26341-00, 498-...
This kit includes the following bearings: Top bearing type 1: ID 25mm x OD 43mm x W 11mm. Top bearing type 2: ID 27mm x OD 43mm x W 11mm. Bo...
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 520VX...
Outer diameter 40mm. Inner diameter 24mm. Thickness 1mm. Material: Alloy.
Needle bearings: 22mm x 28mm x 16mm. TourMax: SNT-205. Made in Japan. Replacement aftermarket part for the following OEM numbers: Kawasaki 3...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. The RXP ch...
Outer diameter 17.00mm. Length 35.50mm. Thickness 2.30mm. Heavy duty clutch springs.
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
Inner diameter 30mm. Outer diameter 48mm. Width 12mm.
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thick...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
Length: 815mm (32"). Clock fit: screw over 11mm. Tacho drive end: screw in 15mm. Inner type: square/square. Note: This rev-counter cabl...
Includes all bearings and seals. Heavy duty tapered roller bearings. Direct replacement for OEM bearings. Upgrade replacement for ball style...
6v Universal Rectifier. Single bolt mounting. 2 wires with spade connectors. Plastic body. If this product is out of stock you can also use ...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF569.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF569.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Many models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many others may use a longer HT lead than this one at 280mm which is non-r...
Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF569.17. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF569.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Rear. Tooth Count: 46. JT Part Number: JTR853.46. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 44. JT Part Number: JTR853.44. Type: Standard. Material: Steel. Fitment: Direct replacemen...
